User manual ROSEN CV6825

[. . . ] 4 Operating the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Switching On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Lowering the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 2 Point the remote at the screen and press the POWER button to turn on the VCR. Playback begins. To listen over the vehicle speakers: To connect the auxiliary device to the VCR RCA jacks: 1 Connect the right channel audio to the red jack. 2 Connect the left channel audio to the white jack. 3 Connect the video to the yellow jack. Note: 1 Power on the system. 2 Turn on the vehicle radio and tune it to 88. 7 FM. 3 Press SPEAKER ON/OFF on the remote until "FM ON" appears on the screen. 4 If you hear no audio, try tuning the radio to 89. 1 FM. To use another video source: When using a non-battery operated auxiliary source (video game, or other) in a vehicle, a 12VDC/110VAC power inverter is required. To play an auxiliary device: 1 Power on the device. 2 Press MODE on the remote until "LINE 2" appears on the screen. (such as an optional video game or camcorder) 1 Connect the RCA audio and video outputs of the device to the Line Inputs on the front of the VCR. 2 Press MODE on the remote until "LINE 2" appears on the screen. The Line 2 video image appears on the screen. To watch broadcast television: 1 Press MODE until "CH___" and the current channel number appear on the screen (for example, "CH 2"). 2 Press the up and down arrow buttons on the remote to change channels. Page 3 Rosen Products ClearVue 6825 VCR System Owner's Manual Page 12 Remote Control Reference About the ClearVue 6825 VCR System Changing View Settings About the ClearVue 6825 VCR System Welcome to the ClearVue 6825 VCR System Owner's Manual. The ClearVue 6825 includes the following components: To adjust settings for color, contrast, brightness, or tint: 1 Press VIDEO MENU on the remote. The following menu appears in the screen. ***MENU*** COLOR CONTRAST BRIGHT TINT (32) (32) (32) (32) · Overhead Monitor · Video Cassette Recorder (VCR) with TV Tuner · Wireless IR Headphones (2 pair) · Wireless IR Transmitter Dome · Remote Control · FM Modulator (enables the video sound to be heard over your vehicle's speakers) 2 Press the up and down arrow keys on the remote to highlight a menu option. Each menu option has a range of values from 0 to 63, with 32 as the default. 3 Press the left arrow key on the remote to reduce a setting. 4 Press the right arrow key on the remote to increase a setting. 5 Press EXIT on the remote to close the menu. · Vehicle Trim Ring · Other parts and cables which are installed out of sight in your vehicle Note: The ClearVue 6825 VCR system is intended to be used with your ignition key switch in the Run or Acc position. Extended use of the system without the engine running should be avoided, as it could drain the battery. Page 11 Rosen Products ClearVue 6825 VCR System Owner's Manual Page 4 Operating the System Remote Control Reference Operating the System Precautions Basic Remote Functions Point the remote control toward the overhead monitor. To view a video tape at a slower speed, press SLOW. To fast forward a video tape, press FFWD. To pause or resume playback, press PLAY/PAUSE. [. . . ] To adjust the headphone volume, rotate the thumb wheel switch on the headphones. The wireless IR headphones require two AAA batteries. To replace the batteries, remove the battery compartment cap on the right earpiece and insert batteries, as shown. 2 Tune the radio to 89. 1 FM. To turn off audio over the car speakers, press SPEAKER ON/OFF on the remote. [. . . ]