User manual ROSEN R6500

[. . . ] SECURITY CODE O DVD CDC ENT M TV MEM ZOOM T REPEAT LOCATE OPTION VIEW WIDE CANCEL Before operating the unit, please read these instructions carefully OT01004710-20020606 Table of Contents 1. LAYOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01 02 02 02 02 02 02 02 03 04 04 04 04 04 05 05 05 05 05 06 06 06 06 06 06 07 08 08 08 08 08 08 08 09 09 09 09 09 09 09 10 10 10 10 10 10 2. AUDIO SETTING Turning system on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Contrary to popular opinion, FM broadcasts are not static free, and although your new radio has a built-in electronic interference absorption circuit, some static will be evident from time to time, especially in areas without a direct line of sight to the transmitter. There are two phenomena peculiar to VHF mobile reception. FLUTTER As VHF signals reflect off solid objects, it is possible to pass through areas of "Shadow" caused by tall buildings and/or hilly terrain, which effectively block out the signal. As the vehicle passes in and out of shadow areas, the level of signal will vary at a rapid rate, creating a flutter type of interference to the signal. DISTORTION (MULTIPATH) Distortion may occur when the direct signal from the transmitter and a reflected signal reach the antenna at the same time and either cancel or aid each other, like ghosting on a TV. This results in intermittent distortion of the signal whilst moving or constant distortion when stationary, such as at a traffic light or when parked. Should this distortion occur while stationary, moving the vehicle approximately one or two meters would on most occasions correct the problem. Circuitry has also been included in this radio to reduce this type of distortion. 06 2 DIN DVD PLAYER 6. 5" WIDE SCREEN MONITOR DVD OPERATION DVD OPERATION 2 DIN DVD PLAYER 6. 5" WIDE SCREEN MONITOR 24 SECURITY CODE The DVD player has the ability to play DVD, VCD, Audio CD, MP3 audio and MPEG video, as well as display JPEG and BMP images. To play a DVD or VCD Press the DVD button to activate DVD play. Press the button to lower the front screen and access the disc insertion slot. Insert DVD or VCD, the disc will automatically load, indicated by "DISC LOADING" on the display. Once loaded the disc will start to play if there is no recorded menu. If the disc has more than one title, a menu screen will appear on the screen. Use the JOYSTICK to scroll to preferred title. Press the ENT button to play selected title. To return to Title Page, press the MENU or TITLE buttons PLEASE NOTE: The On Screen Display (OSD) will show "INVALID DISC" if the disc region code does not correspond with the unit setting. Stop During DVD/VCD playback press the STOP button to stop play. The player will enter the resume playback feature, indicated by "PRESS PLAY TO CONTINUE" on the display. If the PLAY button is pressed next, play will resume. If the STOP button is pressed twice the resume playback function will be cancelled, indicated by "STOP" on the display. DVD menu To access the DVD/VCD menu, press the MENU button. Use the JOYSTICK button to scroll to the menu item and press ENT to start selection. DVD Title Some DVD discs may have more than one title. If the disc has a title menu, this can be accessed by pressing the TITLE button. [. . . ] The display will show the current TV station channel number on the display for approximately 5 seconds. The TV stations have been preset for your location. To Change channels Press the JOYSTICK Up or Down to change the channel up or down. TV Memory It is possible to store up to 20 stations into the memory. To access TV memory, press the TV MEM button. [. . . ]