User manual ROSIERES C 3010

[. . . ] After every use, some cleaning of the hob is necessary to prevent the build up of dirt and grease. If left, this is recooked when the hob is used and burns giving off smoke and unpleasant smells, not to mention the risks of fire propagation. The hob's control area is sensitive, do not place hot containers on it. â· Never cook food directly on the glass ceramic hob. [. . . ] Aluminium residues sometimes appear as scratches on the hob, but can be removed if cleaned immediately. Because of its low melting point, thin aluminium should not be used. Good performance, but copper may leave residues which can appear as scratches. the residues can be removed , as long as the hob is cleaned immediately. However, do not let these pots boil dry. PRESENTATION according to the model â· Hilight zone : a metallic conductor strip is spread uniformly over the whole surface unit. It is effective within 3 seconds and is suitable for steady, homogeneous and also sustained cooking. The glass-ceramic hob benefits from greater heat output which is generated by the hilight cooking zones thereby accelerating the cooking process. Modifications to the design of the hob have not affected the capacity of the glass to withstand high temperatures, but they have improved controllability. With the "Coup de feu" facility, reduced cooking times of up to 15% can be achieved, depending upon the method of cooking and the type of saucepans being used. hilight zone 3200 W : provides user a super high speed burner. - Press again on the timer button to select a time in minutes between 0 and 99 minutes or press on the "-" button to decrease the time between 60 minutes and 0. The programmed time can be modified at any moment reactivating the cooking zone and then the timer button. When the time is run, the cooking zone goes off automatically and an audible beep sounds for 1 minute, press the timer button to stop it. The time can be used alone as reminder, it will ring at the end of the programmed time. It is also useful for cleaning the control strip as the controls can be locked without the cooking zones being on. According to your choice, start or not the cooking zones. Press the locking button to set the data ; in this way no other button works, except the On/Off button. To release the locking function, just press the locking button ; the indicator lamp goes off, all the controls work again. If when the controls are locked, the timer is on, the time will be counted automatically and the zone switched off at the end of the programmed time. If the locking control is on when the hob is finally shut down, the locking control stays operational and prevents any action when the hob is restarted. The following examples are for information only. [. . . ] â· It is advisable to keep away from the hob all substances which are liable to melt, such as plastic items, sugar, or sugar-based products. mAINTENANCE: - Place a few drops of the specialised cleaning product on the hob surface. - Rub any stubborn stains with a soft cloth or with slightly damp kitchen paper. - Wipe with a soft cloth or dry kitchen paper until the surface is clean. [. . . ]