User manual ROSIERES LV 11

[. . . ] Overheated fats or oils can quickly catch on fire. in the unlikely event of a crack appearing on the surface , do not use the hob. Immediately disconnect the hob from the electrical power supply and call the After Sales Service. Metallic objects such as knives, forks, spoons or lids should not be left on the induction hob, because if they are too large or too heavy, they could become hot. [. . . ] Put simply, induction technology has two main advantages : · As heat is emitted only by the pan, heat is maintained at its maximum level and cooking takes place without any heat loss. There is no thermal inertia, as cooking automatically starts when the pan is placed on the hob and stops when it is removed. _________________________________________________________________________________ A HIGH SAFETY APPLIANCE ____________________________________________________________________________ The induction hob is fitted with various safety devices to protect it against any unexpected or wrong working. If your hob is correctly installed and used, the safety devices will rarely be needed. If the heat is increasing excessively, the probe switches off the hob. When the hob has cooled down, you will be able to use it again. Safety "empty pan" : a probe is placed under each heating area. It will immediately detect a wrong temperature for the empty pan, or the ceramic glass. Safety "detection" : The presence detector allows the working and so the heating. A small object (eg a spoon, knife or ring) placed on the heating area will not be considered as a pan and therefore the hob will not come on. Safety "boiling over and splashing" : If any boiling over and splashing occur, the hob will stop. If the seven seconds elapses before you set the power level, just start again from scratch. As soon as the touch is released, the power level remains fixed. It can be altered at any time simply by pressing the "-" or "+" touches. How to stop the induction hob Push the touch of the zone which is functionning. How to use the cut-out timer (from 0 to 99 minutes) It works only with the "rear" zone. Affichage of Display du the niveau de power puissance level Push the touch "+" of the timer until the display of the cooking time, indicated in minutes. Cooking time can be adjusted during cooking by pressing "+" or "-" touches. for a quicker setting , keep the finger on the selected key-knob "+" or "-" of the timer. When the time is up, the heat zone switches itself off and the corresponding display disappears. a buzzer signals the end of the programme for two minutes. It can be done by pressing the "-" touch or by switching off the zone. [. . . ] Scrape with a scraper by respecting a 30° angle against the hob, till the complete removal of the hard stains. Wipe with a soft cloth or a dry paper towel till the surface is clean. ADVICE : A frequent cleaning leaves a protective coating which is essential to prevent from scratches and abrasion. Make sure that the surface is clean before using the hob again. [. . . ]