User manual ROSIERES RFD7659MIN

[. . . ] 10 FR GENERAL WARNINGS Read the instructions carefully to make the most of your oven. We recommend you keep the instructions for installation and use for later reference, and before installing the oven, note its serial number below in case you need to get help from the after-sales service. When you have unpacked the oven, make sure that it has not been damaged in any way. If you have any doubts at all, do not use it: contact a professionally qualified person. [. . . ] The temperature display is fixed but can be modified during the cooking cycle. The oven will start cooking and will start to heat up. The indicator light flashes until the selected temperature has been reached. An audible signal sounds at the end of this operation and the indicator light becomes fixed. 3- A cooking time and an end of cooking time can be programmed by turning the programme selector knob to "cooking time" or "end of cooking time". The "cooking time" or "end of cooking time" display starts flashing. Using the central button, modify the settings as required and confirm. When you have done this, do not forget to turn the programme selector knob back to to confirm the new setting. For more details about programming, refer to the chapter entitled PROGRAMMING. 4- At the end of the cooking cycle, turn the function selector knob back to . The indicator flashes again, it will remain also turned on after having extinguished the oven and it will estinguish when the inside temperature of the oven is sufficiently low. 15 GB HOW TO USE THE OVEN • RECIPE MODE according to the oven model The recipes are described on the table below. For each mode of cooking a temperature is pre-programmed according to the weight, it is not adjustable. 1- Turn the oven selector knob to the Recipe position . 4- When the cooking time is up, the oven switches itself off automatically. An audible signal sounds for 15 seconds to tell you the cycle has ended and the "cooking time" and STOP symbols flash. If you do not do this the "cooking time" and STOP symbols will continue flashing. The cooling fan will continue operating for a while and will only stop when the oven has cooled down sufficiently. At the end of the cooking, the indicator flashes again and stays lighted even if the oven is switched off. It disappears only when the temperature is sufficiently low. the first Recipe display “Bread” will start flashing. With the central button, select the most appropriate recipe to the food to be cooked and confirm by pressing the same button. [. . . ] Turn the programmation control knob to the end of time and set the end of time required. At the end of the pyrolytic cycle the oven will automatically switch off. For 15 seconds, an audible signal lets you know that the cycle has ended and the “time” and “Stop” indicator lights will flash. Unless you do this, the symbols will continue flashing. [. . . ]