User manual ROTEL RCD-820BX

[. . . ] If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take the unit to a qualified service person for inspection and necessary repairs. Read all the instructions before connecting or operating the component. Keep this manual so you can refer to these safety instructions. [. . . ] Be sure the power switch on the front panel of the RCD-1072 is turned off (in the "out" position). Then, connect the supplied power cord to the AC power receptacle on the rear of the unit and the AC power outlet. If you are going to be away from home for an extended period of time such as a monthlong vacation, it is a sensible precaution to unplug your CD player (as well as other audio and video components) while you are away. Note: To prevent loud noises that could damage your speakers, turn off all the system components when you make any signal connections. The RCD-1072 can be operated using its front panel buttons or from corresponding buttons on the supplied infrared remote control. Specific instructions for each of these controls are detailed below. Most of the buttons are duplicated on the front panel and on the IR remote control. However, there are a few exceptions where the buttons are only available on one or the other. These exceptions are noted in the instructions. A pair of standard RCA jacks supplies an analog output signal from the RCD-1072 to the source inputs of an audio preamplifier, integrated amplifier, or receiver. select high quality audio interconnect cables. The DIRECT ACCESS buttons may also be used to memorize tracks in PROGRAM mode (see PROGRAM Button section). A motor-driven disc drawer, located in the center of the RCD-1072, slides out to accept a compact disc and retracts to play the disc. The drawer can be closed in two ways: pushing the OPN/CLS button or pushing the PLAY button. This button is used to temporarily suspend play. The disc continues to spin and play will be resumed from the current position. the PAUSE indicator will light in the Display. To resume playing the disc, press the PAUSE button again or press the PLAY button. These buttons are used to select tracks on the disc. When a disc is playing, pressing the right TRACK button advances to the beginning of the next track. Pressing the left TRACK button returns to the beginning of the current track. Pressing twice quickly in succession returns to the beginning of the previous track. [. . . ] the REPEAT button steps sequentially through the available options. Press the button once and the RCD-1072 will repeat just the current track, displaying the indicators REPEAT 1 in the Display. Press the button a second time and the RCD-1072 will repeat the entire disc, displaying REPEAT ALL in the Display. press the button a third time to cancel the REPEAT function. [. . . ]