User manual ROTEL RDV-1050

[. . . ] 10-10 Shinsen-Cho Shibuya-Ku Tokyo 150-0045 Japan Phone: +81 3-5458-5325 Fax: +81 3-5458-5310 Rotel of America 54 Concord Street North Reading, MA 01864-2699 USA Phone: +1 978-664-3820 Fax: +1 978-664-4109 Rotel Europe Dale Road Worthing, West Sussex BN11 2BH England Phone: +44 (0)1903 221 600 Fax: +44 (0)1903 221 525 Rotel Deutschland Kleine Heide 12 D-33790 Halle/Westf. Germany Phone: +49 05201-87170 Fax: +49 05201-73370 www. rotel. com RDV-1050 DVD Player 082 OMRCD1050-US 020404 RDV-1050 DVD Player 2 Important Safety Instructions WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. [. . . ] SPK. SETTING menu This menu can be selected only when ANALOG OUT in the AUDIO preference display is set to MULTI CHANNEL. MODE: You can select the speaker configuration type according to your speaker systems. Setting options: 5. 1 CH. , EXPERT 5. 1 CH. : select when you connect the unit to a 5. 1-channel amplifier and use the front, surround, center and subwoofer speakers. EXPERT: Select when you want to adjust the audio output of the RDV-1050 to match the characteristics of your speakers. The SIZE, DELAY, and LEVEL setting items are available. See the "Fine Tuning for Your Speakers" section that follows for information on how to adjust these three items. 6 Press / to select a desired analog output signal type. Set this item correctly when you play back a DVD VIDEO disc recorded with surround multichannel audio. · When connecting to a surround decoder, select 2-CH DOLBY SURROUND. Screen Saver You can turn the screen saver ON or OFF. Setting options: ON, OFF MP3 and WMA/JPEG The RDV-1050 can play MP3/WMA and JPEG files recorded on a CD-R/CD-RW disc. However, if a disc contains both MP3/WMA and JPEG files, you can only play files of the type selected in this menu. Setting options: MP3 & WMA, JPEG MP3 & WMA: when selected, only MP3/ WMA files can be played back. JPEG: when selected, only JPEG files can be played back. The following messages may appear at the bottom of the opening display. · NOW READING (The RDV-1050 is reading the disc information. ) · REGION CODE ERROR!(The region code of the DVD VIDEO disc does not match the RDV-1050. The disc cannot be played. ) · OPEN · CLOSE · NO DISC ON SCREEN LANGUAGE options · When connecting to a stereo amplifier/receiver or TV, select 2-CH STEREO. · When connecting the unit's 5. 1-channel output, select MULTI CHANNEL. Note that you can perform fine tuning for your speakers when MULTI CHANNEL is selected. The pull-down menu of the DIGITAL AUDIO OUTPUT is already open. 32 14 to select the desired 2 Press / language. You can select the on-screen language for the preference displays, etc. from among ENGLISH, FRENCH and GERMAN. NOTE: Even if you turn off the RDV-1050 it is not disconnected from the AC power source as long as it is connected to the wall outlet. In this state, the unit consumes a very small amount of power. NOTE ­ Invalid Operation Icon: With some discs the RDV-1050 may not be able to perform certain operations. [. . . ] ­ Fast forward/backward playback mode. ­ Slow-motion playback mode. NORMAL: for watching TV in an average room. CINEMA: for watching a movie in a room with suppressed light. USER 1 USER 2: you can adjust parameters that affect the picture character and store the settings as a user preset. [. . . ]