User manual ROTEL RDV-1060

[. . . ] DANGER: Visible and invisible laser radiation when open and interlock failed or defeated. WARNING: There are no user serviceable parts inside. refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. [. . . ] Using the RDV-1060's Progressive Scan mode requires a TV monitor that can display progressive scan video images. the TV monitor must also have component video connections. These TV sets are usually called HDTV or HDTVready monitors. To display progressive scan video, the TV monitor must be connected to the DVD player with component cables and connectors. The Progressive Scan feature only works with HDTV monitors. Do not activate the Progressive Scan feature with analog TV monitors. The Progressive Scan feature is only available when using the Component Video (Y PR PB) output setting. Some DVD-Video discs have scenes that can be viewed from multiple user-selectable camera angles. Discs with multiple angles may provide menu screens for angle selection. Alternatively, you can select different angles (if available on the disc) by pressing the ANGLE button on the remote during playback. An icon appears on screen indicating which angle is selected and how many angles are available. pressing the button repeatedly steps through the available angles. When the Angle Mark feature is turned on in the configuration of the unit, an icon appears on screen when alternate angles are available, informing you that multiple angles are available for a scene and that the ANGLE button can be used. The P-SCAN indicator LED lights on the front panel while in progressive scan mode. to return to normal video output , press the button again. DVD-Video discs can be classified into two types; film source and video source (Some DVD-Video discs contain both film source and video source material). Film sources are recorded as 24-frame per second information, while (NTSC) video sources are recorded as 30-frame per second information. The progressive scan circuitry in the RDV-1060 can be set to recognize film-type material and activate 3:2 reverse pulldown interpolation for the best picture. See the Pic Mode topic in the Setup section of this manual for more information on optimizing progressive scanning. A hand icon on screen indicates that this feature is not available on the current disc. Typically, you select these audio tracks with the disc's setup menus which appear when you insert the disc or which can be accessed during playback by pressing the MENU button. In addition, you can change to an alternate audio track during playback by pressing the AUDIO button on the remote. [. . . ] Enter the existing 4-digit password in the first box, using the NUMERIC (0­9) buttons on the remote. If you enter the wrong password, an invalid password prompt appears and you cannot proceed. If you enter the correct password, the highlight moves to the second box. Enter the new 4-digit password in the second box. [. . . ]