User manual ROTEL RDV-1080

[. . . ] Owner's Manual RDV-1080 DVD Audio/Video Player DVD AUDIO/VIDEO PLAYER RDV-1080 STANDBY DVD AUDIO TITLE GROUP CHAP . STEP MPEG BONUS INDEX DOLBY L C R DIGITAL LFE DTS LS S RS MLP VCDVD V. OFF PROGRESSIVE RANDOM RROGRAM REPEAT REMAIN ALL 1A-B EACH DIGITAL DIRECT PROGRESSIVE 44. 1kHz/ 48kHz 88. 2kHz/ 96kHz 175. 4kHz/ 192kHz OPN/CLS TRACK DISPLAY OFF STOP PAUSE PLAY RDV-1080 DVD Audio/Video Player 2 RDV-1080 Surround Sound Receiver Cautions DANGER: Visible and invisible laser radiation when open and interlock failed or defeated. WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. [. . . ] To change presets: Press the TH POSITION button again, cycling through until you reach the desired tab. There are seven adjustable parameters in a preset, with the selected parameter on the left side of the display: · Brightness controls the overall brightness of the picture. To activate the VSS feature: During playback, press the VSS button on the remote. A display window appears on screen with the current VSS mode shown on the left side. There are four settings for VSS: · Action is suitable for action films and sports where sounds move around the room · Drama provides warm, natural sound. · Theater simulates the sound of a good movie theater. · Off deactivates the VSS feature. To change settings: Press the VSS button again, cycling through until the desired effect appears on the display window. To adjust the intensity of the effect: The intensity of each VSS effect can be increased or decreased in five steps as shown on the bar graph in the display window. Press one of the CURSOR buttons to change the intensity. To close the adjustment window: Press the ENTER button. The window will automatically close following 10 seconds of inactivity. · Press the ON-SCREEN button to show the DVD CONTROL screen. · Use the CURSOR buttons to move the over the subtitle field as shown above. · Press the SUBTITLE button or the CURSOR buttons to change to the next available subtitle option. · Press the ON-SCREEN button to close the display window. NOTE: The position of the subtitle field differs slightly on SVCD screens. SVCD discs always have four subtitle options (plus off) to cycle through, even if there are no subtitles available in some of the positions. · Contrast determines the difference between the lightest and darkest tones. · Sharpness controls picture detail. · Gamma changes the brightness of midtones without altering dark or light tones. · Tint controls overall color balance. · Color determines how saturated or vibrant the colors appear. · Y Delay determines color gap of the display. To select a parameter: Press one of the buttons. Each press will cycle CURSOR through to the next option, as shown on the screen display. To adjust a parameter: Press one of the buttons to increase or decrease CURSOR the setting, as shown on the bar graph on the screen display. [. . . ] If you enter the correct password, the Parental Lock is temporarily removed and playback begins. To Change Parental Lock Settings With playback stopped or no disc in the unit: · Press STOP and ENTER on the remote simultaneously. The PARENTAL LOCK screen appears on the TV with the over the PASSWORD field. · Enter your 4-digit password using the NUMERIC (0­9) buttons on the remote. If you enter the wrong password "Wrong! [. . . ]