User manual ROTEL RSP-1570

[. . . ] RSP-1570 (RSP-1069) 3U RSP-1570 Surround Sound Processor Owner's Manual Register your product at www. Rotel. com/register 2 RSP-1570 Surround Sound Processor > 10 cm > 4 in > 10 cm > 4 in RSP-1570 (RSP-1069) > 10 cm > 4 in 3U > 10 cm > 4 in Rotel products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives. This symbol means that this unit is double insulated. An earth or ground connection is not required. English 3 Notice The COMPUTER I/O connection should be handled by authorized persons only. Important Safety Instructions WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. [. . . ] · Downmixed 2-channel playback of Dolby Digital 5. 1 or DTS recordings. · Dolby 3-channel stereo (left/right/center) of 2-channel recordings. · 5-channel or 7-channel stereo from 2-channel recordings. · One of four DSP modes for DSP concert hall simulation from 2channel music recordings. Note: In addition to the options that follow, you can press the 2CH button on the front panel or the remote to toggle between 2channel downmix and multichannel playback. · On a 5. 1 system. Press the SUR+ button on the remote, then press the +/­ buttons to change between DD 5. 1 channel or DD 2. 0 channel downmix playback. Press the SUR+ button on the remote, then use the +/­ buttons to step through five options: DD 2. 0 channel downmix, DD 5. 1 channel, DD Surround EX center back processing, DD with Pro Logic IIx Music center back processing or DD with Rotel XS center back processing. You should typically select Surround EX or discs that are labeled Dolby Digital Surround EX. For standard 5. 1 channel discs, Dolby Pro Logic IIx Music or Rotel XS processing will provide a more diffuse surround effect than the more highly localized Dolby EX decoding and will probably be the better 6. 1 channel options for non-Surround EX discs. Selecting DD 5. 1 forces the center back channel processing off for conventional 5. 1 channel playback. You can also repeatedly press the DOLBY PLIIx Mode button on the front panel until the desired center back channel option is selected. Press the SUR+ button on the remote, then use the +/­ buttons to step through six options: DD 2. 0 channel downmix, DD 5. 1 channel, DD Surround EX center back processing, DD with English 33 Pro Logic IIx Music center back processing, DD with Pro Logic IIx Cinema back channel processing, or DD with Rotel XS center back processing. You should typically select Surround EX or discs that are labeled Dolby Digital Surround EX. For standard 5. 1 channel discs, Dolby Pro Logic IIx Music or Rotel XS processing will provide a more diffused surround effect than the more highly localized Dolby EX decoding and may be the better 7. 1 channel options for nonSurround EX discs. Selecting DD 5. 1 forces the center back channel processing off for conventional 5. 1 channel playback. You can also repeatedly press the DOLBY PLIIx Mode button on the front panel until the desired center back channel option is selected. · On a 6. 1/7. 1 system with a DTS 5. 1 disc. Press the SUR+ button on the remote, then use the +/­ buttons to step through the optional modes: DTS 2. 0 channel downmix, DTS 5. 1 channel, DTS with Rotel XS center back processing, DTS with Pro Logic IIx Music center back processing, or DTS with Pro Logic IIx Cinema center back processing (available only for 7. 1 channel systems). Selecting DTS 5. 1 forces the center back channel processing off for conventional 5. 1 channel playback. You can also repeatedly press the DTS Neo:6 button on the front panel until the desired option is selected. · On a 6. 1/7. 1 system with a DTS-ES disc. Press the SUR+ button on the remote, then use the +/­ buttons to step through three optional modes: DTS 2. 0 channel downmix, DTS 5. 1, or DTS-ES 6. 1ch/7. 1ch playback. On the front panel, press the DTS Neo:6 button while playing a DTS source to step through the same options. · On a 6. 1/7. 1 system with a DTS 96/24 disc. [. . . ] A 480p signal will be rescaled by the monitor and a 1080p signal will be seen by a monitor with 1080p resolution as a native signal. Some Blu-ray and HD-DVD discs have been recorded in 1080i. These should not be scaled, but are best left to the monitor to interpret into an appropriate format for the screen. Will the HDMI digital output improve the picture quality from old analog sources? HDMI: Frequently Asked Questions What is HDMI? [. . . ]