User manual ROTEL RSX-1057

[. . . ] Owner's manual Surround Sound Receiver RSX-1057 II > 10 cm > 4 in SURROUND SOUND RECEIVER RSX-1057 STANDBY > 10 cm > 4 in VOLUME 1 2 3 4 5 TUNING BAND CD TUNER TAPE1 VIDEO1 VIDEO2 VIDEO3 VIDEO4 VIDEO5 > 10 cm > 4 in 6 7 8 9 0 DIRECT MONO MEMORY 2CH PLIIx MODE DTS Neo 6 DSP MULTI INPUT MUTE ZONE REC > 10 cm > 4 in Rotel products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives. This symbol means that this unit is double insulated. An earth or ground connection is not required. Notice The COMPUTER I/O connection should be handled by authorized person only. Important Safety Instructions WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. [. . . ] In a 6. 1ch or 7. 1 ch system, you can also choose Dolby Surround EX, Dolby Pro Logic IIx Music, Dolby Pro Logic IIx Cinema (7. 1ch only), or Rotel XS processing for center back channels. When playing any Dolby Digital source, you can select one of three dynamic range control settings. See the Dynamic Range topic in the Other Settings section of this manual. 31 English DTS 5. 1 discs DTS 96/24 discs DTS-ES 6. 1 discs DTS decoding is auto-detected and cannot be overridden. You may, however, select a 2 channel downmix of 5. 1 channel recordings or add Rotel XS center back processing for 5. 1 channel discs. In addition to the options that follow, you can press the 2CH button on the remote to toggle between 2-channel downmix and multichannel playback. NOTE: MPEG Multichannel discs MPEG decoding is auto-detected and cannot be overridden. You may, however, select a 2 channel downmix of 5. 1 channel recordings. If the system is configured with center back speaker(s), you can also force Rotel XS processing on or off. NOTE: In addition to the options that follow, you can press the 2CH button on the remote to toggle between 2-channel downmix and multichannel playback. NOTE: In addition to the options that follow, you can select 2-channel, Pro Logic II Cinema (for 5. 1 ch systems), Pro Logic II Music (for 5. 1 ch systems), Pro Logic IIx Music (for 6. 1/7. 1 ch systems), Pro Logic IIx Cinema (for 7. 1 ch systems), 5-channel stereo, or 7-channel stereo by pressing one of the surround mode buttons on the remote (2CH, PLC, PLM, 5CH, 7CH). · On a 5. 1 system. Press the SUR+ button on the remote, then press the +/­ buttons to change between DTS 5. 1 channel or DTS 2. 0 channel downmix playback. · On a 6. 1/7. 1 system with a DTS 5. 1 disc. Press the SUR+ button on the remote, then use the +/­ buttons to step through the optional modes: DTS 2. 0 channel downmix, DTS 5. 1 channel, DTS with Rotel XS center back processing, DTS with Pro Logic IIx Music center back processing, or DTS with Pro Logic IIx Cinema center back processing (available only for 7. 1 channel systems). Selecting DTS 5. 1 forces the center back channel processing off for conventional 5. 1 channel playback. You can also repeatedly press the DTS Neo:6 button on the front panel until the desired option is selected. · On a 6. 1/7. 1 system with a DTS-ES disc. Press the SUR+ button on the remote, then use the +/­ buttons to step through three optional modes: DTS 2. 0 channel downmix, DTS 5. 1, or DTS-ES 6. 1ch/7. 1ch playback. On the front panel, press the DTS Neo:6 button while playing a DTS source to step through the same options. · On a 6. 1/7. 1 system with a DTS 96/24 disc. Press the SUR+ button on the remote, then use the +/­ buttons to step through the optional modes: DTS 2. 0 channel downmix, DTS 96, or DTS 96 with Rotel XS center back processing. You can also repeatedly press the DTS Neo:6 button on the front panel until the desired option is selected. · On a 5. 1 system. Press the SUR+ button on the remote, then press the +/­ buttons to change between MPEG 5. 1 channel or MPEG 2. 0 channel downmix playback. Press the SUR+ button on the remote, then use the +/­ buttons to step through the optional modes: MPEG 2. 0 channel downmix, MPEG 5. 1 channel, MPEG with Rotel XS center back processing, MPEG with Pro Logic IIx Music center back processing, or MPEG with Pro Logic IIx Cinema center back processing (available only for 7. 1 channel systems). Selecting MPEG 5. 1 forces the center back channel processing off for conventional 5. 1 channel playback. You can also repeatedly press the DSP button on the front panel until the desired option is selected. · To select any mode for 2-channel digital recordings. Press the SUR+ button on the remote, then use the +/­ buttons to step through the optional modes until the desired mode is displayed. [. . . ] · In some PAL systems, the menus may not be displayed unless there is an active video signal. · When using progressive scan video signals, make sure that the progressive mode is selected for that video input in the OTHER OPTIONS setup menu. This allows the display of the OSD menus on the TV monitor by interrupting the progressive scan video signal and restoring it after the OSD menus are cancelled. The temporary information screens (such as volume, etc. ) cannot be displayed on the TV monitor when progressive scan signals are used. [. . . ]