User manual ROTEL RSX-1560

[. . . ] RSX-1560 Surround Sound Receiver Owner's Manual RSX-1560 English v2. indd 1 Register your product at www. Rotel. com/register 29/9/08 15:13:46 2 RSX-1560 Surround Sound Receiver > 10 cm > 4 in > 10 cm > 4 in > 10 cm > 4 in > 10 cm > 4 in Rotel products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives. This symbol means that this unit is double insulated. An earth or ground connection is not required. RSX-1560 English v2. indd 2 29/9/08 15:13:56 English 3 Notice The COMPUTER I/O connection should be handled by authorized persons only. Important Safety Instructions WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. [. . . ] Press the SUR+ button on the remote, then use the +/­ buttons to step through four options: DD 2. 0 channel, DD with Pro Logic II Cinema matrix surround, DD with Pro Logic II Music matrix surround, or Dolby Digital 3 channel stereo. You can also repeatedly press the 2CH button on the front panel or the remote to select the same options. Press the SUR+ button on the remote, then use the +/­ buttons to step through four options: DD 2. 0 channel, DD with Pro Logic IIx Cinema matrix surround, DD with Pro Logic IIx Music matrix surround, or Dolby Digital 3 channel stereo. You can also repeatedly press the 2CH button on the front panel or the remote to select the same options. · To select Cinema or Music options in Pro Logic II or Pro Logic IIx modes. Press the SUR+ button twice while in Pro Logic II or Pro Logic IIx modes. Then, use the +/­ buttons to select the Music or Cinema options. Digital Stereo discs qTVW This group of recordings includes any non-Dolby Digital 2-channel signal from the receiver's digital inputs. You can play these recordings in 2-CH Stereo, Dolby 3-Stereo, 5-CH Stereo, 7-CH Stereo modes. You can also use Dolby Pro Logic II matrix surround (5. 1 ch systems), Dolby Pro Logic IIx Music (6. 1/7. 1 ch systems), Dolby Pro Logic IIx Cinema (6. 1/7. 1 ch systems), DTS Neo:6 surround, or one of the DSP 1-4 modes. All of the bass management settings (speaker size, subwoofer, and crossover) are in effect with digital stereo inputs. Note: In addition to the options that follow, you can select 2channel, Pro Logic II Cinema (for 5. 1 ch systems), Pro Logic II Music (for 5. 1 ch systems), Pro Logic IIx Music (for 6. 1/7. 1 ch systems), Pro Logic IIx Cinema (for 7. 1 ch systems), 5-channel stereo, or 7-channel stereo by pressing one of the surround mode buttons on the remote (2CH, PLC, PLM, 5CH, 7CH). · To select any mode for 2-channel digital recordings. Press the SUR+ button on the remote, then use the +/­ buttons to step through the optional modes until the desired mode is displayed. · To select STEREO mode for 2-channel digital recordings. Press the 2CH button on the front panel or remote. · To select Dolby multichannel modes for 2-channel digital recordings. You can also step through the Dolby options (Pro Logic II, Pro Logic IIx, or 3-Stereo) by repeatedly pressing the DOLBY PLIIx Mode button on the front panel. You can select Pro Logic or Pro Logic IIx Cinema or Music modes by pressing the PLC or PLM buttons on the remote. To change the Cinema or Music option in Pro Logic II mode, press the SUR+ button on the remote twice while in Pro Logic II or Pro Logic IIx modes. Then, press the +/­ buttons to select the option. · To select DTS Neo:6 mode for 2-channel digital recordings. You can also step through the DTS options (Neo:6 Cinema or Neo:6 Music) by repeatedly pressing the DTS Neo:6 button on the front panel. To change the Cinema or Music option in Neo:6 mode, press the SUR+ button on the remote twice while in Neo:6 mode. Then, press the +/­ buttons to select the option. Note: When playing any Dolby Digital source, you can select one of three dynamic range control settings. [. . . ] Some Blu-ray and HD-DVD discs have been recorded in 1080i. These should not be scaled, but are best left to the monitor to interpret into an appropriate format for the screen. Will the HDMI digital output improve the picture quality from old analog sources?Analog picture sources from legacy units begin by being less good than digital signals, and while the receiver will translate them into a digital format, the final quality will be constrained by the original source, and the choice of connection (Composite, S-Video or Component). [. . . ]