User manual ROTEL RT-955

[. . . ] WARNING: There are no user serviceable parts inside. refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not allow foreign objects to get into the enclosure. [. . . ] The LED above the switch and the front panel display will light up. Push the button again (returning it to the OUT position), to turn the unit off. NOTE: If you are using a switched outlet on another component to power the RT-955, you should leave the POWER switch in the ON position. The RT-955 will be switched on and off by the other component's switched outlet. Your unit has been factory configured to the correct default mode for the country in which it was purchased. to switch to the USA default mode , press and hold the POWER , MEMORY , and 9 buttons for 5 seconds. The word LOADING will appear in the DISPLAY and the unit will power up in the USA configuration. to switch to the European default mode , press and hold the POWER , MEMORY , and 0 buttons for more than 5 seconds. The word LOADING will appear in the DISPLAY and the unit will power up in the European configuration. This RS-232 serial computer interface connection allows you to operate the unit from a stand-alone home automation controller or from a PC computer running special software. Consult your authorized Rotel dealer for information on these systems and the proper interface with your RT-955's DB9 serial connector. This front panel sensor receives infrared signals from the remote control. Make sure you do not accidentally block this sensor with cables or accessories. Here is an overview of the tuning options (more detailed information is provided in subsequent sections of this manual): · Manual frequency tuning lets you tune up or down to the next station frequency. Press the FREQUENCY DIRECT button on the remote and enter the digits using the NUMERIC buttons. ⷠAutomatic frequency search tuning lets you search up or down to find the next receivable broadcast signal. Use the TUNING controls to search up or down. ⷠMemory station preset tuning lets you directly enter the number of a memorized station preset number. Enter the number of the memorized preset using the NUMERIC buttons. ⷠPreset scan tuning lets you scan up/ down through the memorized station presets. Information on commercial software for using your personal computer to operate audio/video components, including the RT-955, can be found at the Rotel website: www. The large fluorescent display in the center portion of the RT-955 provides status information used in operating the AM/FM receiver (such as station frequency display, band, preset memory, RDS information, etc. [. . . ] Press the PTY button a second time within 5 seconds. the tuner will attempt to find an RDS station broadcasting the selected type of program. If the button is not pressed within 5 seconds after selecting a program type, the PTY function will be cancelled. There are five display options when the currently tuned station is broadcasting RDS information and the RDS indicator in the front panel display is lit. [. . . ]