User manual ROWENTA DW5121D1

[. . . ] € The appliance must not be used if it has fallen to the floor, shows evident of damage, leaks or fails to function correctly. To avoid any danger, have it inspected in an approved service centre. € The surfaces which are marked with this sign and the soleplate are very hot during the use of the appliances. Don’t touch these surfaces before the iron is cooled down. [. . . ] 11) and set the temperature to suit the type 5 • Steam ironing You can steam iron from temperature setting •• upwards. Steam function* : The steam quantity can be set to between no steam (minimum steam quantity) and maximum steam quantity (fig. We recommend setting to maximum steam quantity only when the iron is at temperature setting •••. 6 • Shot of steam (from temperature setting •• upwards) Press the shot of steam button to generate a powerful jet of steam (fig. Wait a few seconds between each shot before pressing the button again. 7 • Vertical shot of steam (from temperature setting •• upwards) TIP Hold the iron 10 to 20 centimetres away from the garment to avoid burning delicate fabrics. Hold the iron to the vertical and press the shot of steam button ( fig. 14) to remove creases from suits, jackets, skirts, hanging curtains etc. Wait a few seconds between each shot before pressing the button again. 9 • Anti-Drip system* This prevents water escaping from the soleplate when the temperature is too low. 10 • Automatic electronic 3-position cut-off* If, although switched on, the appliance is not moved, it will automatically switch off and the auto off light will blink after the following intervals: - After 30 sec. , if the iron is left resting on the the soleplate or lying on its side. , if the iron is left resting on its heel. To switch the iron back on, move the iron gently. Open and close the steam control several times (fig. 16) to prevent the valve hole into the steam chamber from scaling or blocking up. 12 • Storing Allow the appliance to cool down before storing the iron standing on its heel (fig. IMPORTANT Do not wind the cord around the hot soleplate. Never store your iron placed down on the soleplate. MAINTENANCE AND CLEANING IMPORTANT Unplug and allow the iron to fully cool down before maintenance and cleaning. 13 • Anti-scale system Your iron contains an anti-scale cartridge to reduce scale deposits. This considerably prolongs the operational life of your iron. [. . . ] Set the temperature control to a higher temperature. Brown streaks come through the holes inthe soleplate and stain the linen. Residues in the steam chamber or on the soleplate. Fabric fibres have accumulated in the holes of the soleplate and are burning. [. . . ]