User manual ROWENTA DX 8000

[. . . ] DX8000_USA 03. 09. 2004 11:15 Uhr Seite 1 · Fill the iron with tap water to the max mark on the water tank. · Be sure that variable steam lever is set to minimum. · Stand iron on heel and plug in. · Set thermostat to ··· setting. [. . . ] · In normal use a draggy coating may build up on the soleplate (starch, detergent build-up, burnt synthetic fibers). This can be easily removed by using the Rowenta Soleplate Kit or a quality hot iron soleplate cleaner available at most stores. The Rowenta kit is also available through our website: www. rowentausa. com · To prevent scratching of the soleplate, do not iron over sharp objects (zippers, etc. ). Do not place the iron on rough surfaces, e. g. metal iron support, which may scratch the soleplate. Spray function does not work. Priming may be necessary on first use. If troubleshooting does not assist, before consulting the retailer regarding their return/exchange policy, please telephone consumer service at 781-396-0600. 110 347 2714 Rowenta Werke GmbH, 63016 Offenbach am Main DX8000_USA 03. 09. 2004 11:15 Uhr Seite 2 IMPORTANT SAFETY INSTRUCTIONS When using this appliance, basic safety precautions should always be followed including the following: Read all instructions before using this product. · Use appliance only for its intended use. · To protect against a risk of electric shock, do not immerse the appliance in water or other liquids. · The appliance should always be turned off before plugging or unplugging from outlet. Never yank the cord to disconnect from outlet, instead grasp plug and pull to disconnect. · Always disconnect appliance from electrical outlet when filling with water or emptying when not in use. · Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing. · Do not operate appliance with a damaged cord or if appliance has been dropped or damaged. · To avoid the risk of electric shock, do not disassemble the appliance. Ship it to the nearest authorized Rowenta approved service center for examination and repair. Incorrect reassembly can cause a risk of electric shock when the appliance is used. · Not intended for use by children. Close supervision is necessary for any appliance being used near children. Unsupervised use can result in fire or personal injury. Do not leave appliance unattended while plugged in, on an ironing board, or while it is still hot. · Burns can occur from touching hot metal parts, hot water or steam. [. . . ] Dry Position allows you to remove the residual dampness of your fabrics for a professional result. Water Recommendations Tap water Rowenta irons are designed to be used with REGULAR TAP WATER (up to 12 grains of hardness). Variable Steam Maximum steam setting should only be used when the iron is set to the highest temperature setting (···) . Steam will be produced when iron is used horizontally. Spray setting This feature is ideal for removal of stubborn wrinkles and set in creases. Ensure there is water in the tank then press the spray button. [. . . ]