User manual ROWENTA RO4351.11 X-TREM POWER ALLERGY CARE

[. . . ] Do not use the appliance if it has been dropped and shows signs of damage or functions abnormally. In this case, do not Make sure that the operating voltage of your vacuum cleaner is the same as your supply voltage - 230-240v alternating current. Unplug the appliance by removing the plug from the power outlet: - immediately after use, - before changing accessories, - before maintenance, cleaning or changing the dustbag. Do not use the appliance if the power cord is damaged. [. . . ] 2 • Plugging in the electrical power cord and using the vacuum cleaner Fully unroll the cord, plug in your vacuum cleaner and press the On/Off pedal, (fig. Set the power using the vacuum cleaner’s power control, if your model is equipped with a High Control wand (fig. 7) you can also adjust the vacuum power using the 3 position slider* : • Position • Position • Position for fabrics and furniture (fig. *Depending on model: this is either equipment specific to certain models or available as an optional accessory. If your appliance is equipped with the Compact System with folding tubes: • Retract the telescopic tubes (fig. 11) and press the «Push» button to open the tube and fold it. € If your appliance is equipped with CLIP’N’STORE, attach your hose to the accessory clip for easier storage (fig. After use, stop your appliance by pressing on the on/off pedal and unplug it (fig. Stow the cable by pressing the automatic cable rewind pedal (fig. In the upright position, place the suction unit in the parking position (fig. You can then carry and store your vacuum cleaner in the CARE AND CLEANING IMPORTANT Always turn off and unplug your appliance before maintenance or cleaning. 2 • Change the HEPA* filter cassette (ref. ZR 0029 01) IMPORTANT Replace the filtration system once a year. € Open the lid of your vaccuum cleaner (fig. 16) and then remove the HEPA* filter cartridge (fig. Check that the Hepa* filter cassette is fitted correctly before re-closing the cover. IMPORTANT Never operate the vacuum cleaner without a Hepa filter cartridge. Your appliance is equipped with a Hepa filter cartridge presence safety system for this (the cover will not close if a Hepa filter cartridge has not been installed). 1 • Changing the bag The bag full indicator shows you when the bag is full or saturated. If you notice that your vacuum cleaner is less efficient, select the maximum power and hold the nozzle off the floor. If the indicator remains red, replace the bag. Open the cover on your vacuum cleaner (fig. [. . . ] mini turbobrush To clean upholstery fabrics in depth. Fit the mini turbobrush to the end of the tube. turbobrush To remove threads and animal hairs ingrained into mats and carpets. Fit the turbobrush to the end of the tube. [. . . ]