User manual ROWENTA RO6383EA SILENCE FORCE COMPACT 4A

[. . . ] The rewinder and cord assembly of your vacuum cleaner must be replaced by an Approved Service Centre because special tools are required for carrying out any repair in order to prevent any danger. 3 • Repairs Repairs should only be carried out by specialists using original replacement parts. It is dangerous to try to repair an appliance yourself. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Cover Bag full indicator Carrying handle Cover opening Automatic cable rewind pedal Bag compartment Bag holder Suction opening HEPA filter cartridge* ref. [. . . ] To remove it, turn in the opposite direction and pull. Attach the accessory clip to the tube and place the accessories on it. The accessory support sits on the tube; the accessories can be taken off the support, which remains attached to the tube (fig. Adjust the desired length on the tube (fig. If your appliance is equipped with the Compact System with folding tubes: (fig. € To use, unfold the 2 tubes until you hear a «click». Fit the desired accessory onto the end of the tube (fig. 5): • For rugs and wall-to-wall carpeting: use the nozzle with brushes lifted. IMPORTANT If the vacuum suction unit is hard to move, reduce the vacuum power on your appliance using the electronic power control on the vacuum cleaner. € For parquets and smooth flooring: use the nozzle with the brush extended or use the parquet nozzle*. € For corners and other areas that are difficult to reach: use the crevice tool*. IMPORTANT Do not reuse the wonderbag, it is a single use bag Place a new wonderbag in the bag holder, using the ring (fig. Position the bag and open it out inside the compartment (fig. Make sure that the bag is in the correct IMPORTANT Never operate the vacuum cleaner without a bag. IMPORTANT Your appliance is equipped (depending on the model) with a safety system ensuring that a bag is present (the lid will not close if you have not installed a bag). 3 • Cleaning your vacuum Clean the accessories of your appliance with a soft damp cloth, then dry them. do not use abrasive or aggressive products. *Depending on model: this is either equipment specific to certain models or available as an optional accessory. Indd 11 2/09/08 8:49:51 TROUBLESHOOTING IMPORTANT As soon as your vacuum cleaner starts to malfunction, and before performing any checks stop the appliance by pressing the Start/Stop switch. If your vacuum cleaner does not start • The appliance is not plugged-in, check that the appliance is correctly plugged in. If there is no suction • An accessory or the tube is clogged. unclog the accessory tube or flexible hose. [. . . ] Rowenta Approved Service Centres (see the attached address list). Telescopic crevice tool To get into corners and places that are hard to reach. Fit the telescopic crevice tool onto the end of the power nozzle or the tube. Fit the hardfloor tool to the end of the tube. [. . . ]