User manual RUSSELL HOBBS BLACK SATIN COFFEE MAKER

[. . . ] 8 Don't connect this coffee maker to an external timer or remote control system. 10 Route the cable so it doesn't overhang and can't be caught or tripped over accidentally. 11 Unplug the coffee maker when not in use, before moving or cleaning. Let it cool down before cleaning and storing away. [. . . ] 15 If you're making less than 5 cups of coffee, press the e button to turn the brew strength feature on. e will appear in the display (see "brew strength e"). 16 Press the 2 button, the 2 light will come on. 18 After a few seconds, coffee will drip into the carafe. pause and pour 19 You may remove the carafe to pour coffee at any time. The non-drip valve will stop coffee dripping on to the hotplate. 20 To avoid overflowing, replace the carafe within 30 seconds. This may not sound much, but its more than enough time to pour a couple of cups. 5 coffee later ­ timer 21 Check that the carafe is on the hotplate, and the coffee maker is plugged in. 23 The display will show AM and 12:00 will flash. nb If you go past the hour or minute you want, you can't go back, you have to keep pressing the h (hour) and m (minute) buttons to you get back round to it again. 24 To set the time, press the h (hour) and m (minute) buttons. Check that the time is set to the appropriate AM or PM setting, if it isn't, keep pressing the h button till it is. nb If you unplug the coffee maker, the time will reset to AM 12:00, the next time you plug it in. The display will show AM 12:00 and PROGRAM will flash in the display. The coffee maker is now in `program mode'. nb If you don't press the h or m button to change the brewing time within about 5 seconds, the coffee maker will come out of `program mode' and the display will show the time. 26 Press the h and m buttons to select the time you want the coffee maker to make you coffee. Check that the time is set to the appropriate AM or PM setting, if it isn't, keep pressing the h button till it is. 27 Press the v button to activate the timer, the v light will come on, and AUTO will appear in the display. 28 Brewing will start at the pre-selected time. The v light will go out, AUTO will disappear from the screen, then the 2 light will come on and ON will appear in the screen. 29 When the brewing process has finished, the coffee maker will stay on for 2 hours while the hotplate keeps your coffee hot, then the coffee maker will auto shut-off (see "auto shut-off" - next page). 30 If you need to cancel the timer before brewing has started, press the v button, the v light will go out, and AUTO will disappear from the display. [. . . ] If you remove the plug, dispose of it. spare parts Note the Model No (on the rating label) and the parts, ring 0845 658 9700 for prices, or email service@saltoneurope. com, then purchase using VISA or MASTERCARD. service The product isn't user-serviceable. If it's not working, read the instructions, check the plug fuse and main fuse/circuit breaker. If it's still not working, consult your retailer. If that doesn't solve the problem: Pack carefully, with a note of your name, address, day phone number, and what's wrong. [. . . ]