User manual RUSSELL HOBBS SLIPSTREAM IRON 2200W 15129

[. . . ] 9 Don't leave the iron unattended while plugged in, or while it's standing on the ironing board. It could be knocked over by you, by a child, or by a pet. 10 Unplug the iron before filling, before cleaning, and after use. 11 Don't fill the iron directly from the tap, use the jug. [. . . ] 20 If you don't, you'll get water on your clothes, not steam. 21 Turn the steam control to the setting you want, S = no steam, # = high steam (#3). 22 Wait till the thermostat light goes out, then start ironing. Test this on a hidden part of the fabric. 23 This works with dry or steam ironing, as long as there's water in the reservoir. 24 Check that there's water in the reservoir. 27 Press the * button ­ you may have to press it 2 or 3 times to pump water through the system. steam ironing spray shot of steam 28 This works with dry or steam ironing, as long as there's water in the reservoir, and the temperature is above S. 29 Check that there's water in the reservoir. 30 Check that the temperature control is at S or higher. 32 Press the ~ button ­ you may have to press it 2 or 3 times to pump water through the system. 33 Leave 4 seconds between shots, to let the temperature build up. dry ironing 34 If you're going to be dry ironing for 20 minutes or more, empty the reservoir first, to avoid spontaneous bursts of steam. 36 Wait till the thermostat light goes out, then start ironing. 4 vertical steaming 37 Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics. 38 Check that there's adequate ventilation behind the fabric, otherwise moisture may build up, causing mildew. 39 Check that there's nothing behind the fabric that may be damaged by the steam. 40 Check that pockets, turn-ups, and cuffs are empty. 41 Check that there's water in the reservoir. 42 Turn the temperature control to max, turn the steam control to S. 43 Hold the iron close to (but not touching) the fabric. 44 Press the ~ button (you're using the shot of steam function vertically). 45 You may have to press it 2 or 3 times to pump water through the system. 46 Leave 4 seconds between shots, to let the temperature build up. after use 47 Turn the temperature control to ·, turn the steam control to S. [. . . ] It's on the rating plate (usually underneath the product). The product isn't user-serviceable. If it's not working, read the instructions, check the plug fuse and main fuse/circuit breaker. If it's still not working, consult your retailer. [. . . ]