User manual RUSSOUND ACT-1

[. . . ] SPECIFICATIONS ACT-1 Current Rating: Circuit Breaker: 10 amps at 120VAC 10 amp re-settable ACT-1UK 10 amps at 230VAC 10 amp re-settable 1/8" male jack, tip(+), sleeve(-) 100mA at 12VDC 12. 5oz (. 4kg) 3 3/4"W x 2"H x 5"D (9. 5 x 5. 1 x 12. 7 cm) LIMITED WARRANTY The Russound ACT-1 and ACT-1UK are fully guaranteed for Two (2) years from the date of purchase against all defects in materials and workmanship. [. . . ] Damage to or destruction of components due to improper use voids the warranty. In these cases the repair will be made at the owner's expense. To return for repairs, the unit must be shipped to Russound at the owner's expense, along with a note explaining the nature of the service required. Be sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit. 12VDC Input Connector: 1/8" male jack, tip(+), sleeve(-) Input DC Current: Weight: Dimensions: 100mA at 12VDC 12. 5oz (. 4kg) 3 3/4"W x 2"H x 5"D (9. 5 x 5. 1 x 12. 7 cm) NOTICE ACT-1 Must Mount Vertically. ACT-1 Doit Monter Verticalement. 5 Forbes Rd. Newmarket, NH 03857, USA ¤ 603. 659. 5170 · Fax 603. 659. 5388 e-mail: tech@russound. com Come visit us at: ACT-1 ACT-1UK 12VDC Triggered AC Outlet ACT-1 Instruction Manual ACT-1 120VAC ACT-1UK 230VAC PRODUCT OVERVIEW The ACT-1 is a 12 Volt DC triggered 120 or 230 VAC outlet with a re-settable circuit breaker. The ACT-1 can switch up to 10 Amps to a power strip or a single component. When activated by a 12 Volt Trigger output (from an audio distribution system for example) the ACT-1 can be used to turn on the power to several audio components or other devices. CONNECTION INSTRUCTIONS Connect the ACT-1 to the component with the 12 Volt triggered ouput (rated at 100mA or greater) using an 1/8" jack. [. . . ] UK US 12V TRIG 100mA 12VDC Trigger Output from Audio Distribution System 120VAC Outlet [. . . ]