User manual RUSSOUND HOME THEATER PLATES DATASHEET

[. . . ] Data Sheet HOME THEATER PLATES HTP-1, HTP-2 HTP-1 HTP-2 As part of Russound's PlateMate® line of wall plate solutions, the HTP-1 and HTP-2 Home Theater Plates provide easy in-wall hookup of all the speakers in a multichannel surround sound system. The HTP-1 accommodates 5. 1 and 6. 1 surround sound configurations. It provides dual binding posts for six speakers and line-level RCA connectors for two powered subwoofers. [. . . ] wire size: 12 AWG RCA connectors: (2) Russound PM-RCAF, gold-plated brass Plate: Standard double gang (U. S. style) Finish: White Dimensions: 4. 84" W x 4. 84" H x 1. 1" D (12. 3 x 12. 3 x 2. 8 cm) Weight: 8. 5 oz (241 g) HTP-2 Binding posts: (14) Russound PM-BP 5-way captive, 7/16" (11 mm) hex head, gold-plated brass Max. wire size: 12 AWG RCA connectors: (2) Russound PM-RCAF, gold-plated brass Plate: Standard double gang (U. S. style) Finish: White Dimensions: 4. 84" W x 4. 84" H x 1. 26" D (12. 3 x 12. 3 x 3. 2 cm) Weight: 10. 5 oz (298 g) Accessories S2-32-W Double-gang plastic wall box with Auto Clamps® AW162CL3 2-conductor, 16-gauge unshielded speaker cable AW164CL3 4-conductor, 16-gauge unshielded speaker cable PM-DB Premium gold-plated dual banana plug, box of 6 PM-SB Premium gold-plated single banana plug, box of 12 Limited Warranty The Russound HTP-1 and HTP-2 are fully guaranteed for ten (10) years from the date of purchase against all defects in materials and workmanship. For this warranty to apply, the unit must be installed and used according to its written instructions. During this period, Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor. Accidental damage and shipping damage are not considered defects under the terms of this warranty. Russound assumes no responsibility for defects resulting from abuse or servicing performed by an agency or person not specifically authorized in writing by Russound. If service is necessary, it must be performed by Russound. Damage to or destruction of components due to excessive power voids the warranty. In these cases, the repair will be made at the owner's expense. To return for repairs, the unit must be shipped to Russound at the owner's expense, along with a note explaining the nature of the service required. Be sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit. Before returning a unit for repair, call Russound at (603) 659-5170 for a Return Authorization number. [. . . ] All trademarks are the property of their respective owners. Specifications are subject to change without notice. Russound is not responsible for typographical errors or omissions. [. . . ]