User manual RUSSOUND VMR1

[. . . ] A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. [. . . ] If service is necessary, it must be performed by Russound. The unit must be returned to Russound at the owner's expense and with prior written permission. Accidental damage and shipping damage are not considered defects, nor is damage resulting from abuse or from servicing by an agency or person not specifically authorized in writing by Russound. This warranty does not cover: damage caused by abuse, accident, misuse, negligence, or improper installation or operation; power surges and lightning strikes; normal wear and maintenance; products that have been altered or modified; any product whose identifying number, decal, serial number, etc. Russound sells products only through authorized dealers and distributors to ensure that customers obtain proper support and service. Any Russound product purchased from an unauthorized dealer or other source, including retailers, mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy. Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product. Damage to or destruction of components due to application of excessive power voids the warranty on those parts. In these cases, repairs will be made on the basis or the retail value of the parts and labor. To return for repairs, the unit must be shipped to Russound at the owner's expense, along with a note explaining the nature of service required. Be sure to pack the unit in a corrugated container with at least three (3) inches of resilient material to protect the unit from damage in transit. Before returning a unit for repair, call Russound at 603. 659. 5170 for a return authorization number. Write this number on the shipping label and ship to: Russound, 5 Forbes Road, Newmarket, NH 03857. Overview The VMR1 Receiver is an in-wall device for use with the VM1 Video Matrix to provide connections for video displays in rooms where component video distribution is desired. It receives distributed video signals from the Video Matrix through a single CAT-5e cable. The receiver provides an analog component video signal from any source connected to the Video Matrix. Red, green, and blue RCA jacks in a single-gang Decora®-style wall plate connect to the display with an RGB video cable. [. . . ] Insert the VMR1 into the wall box and secure it with screws. Crimp RJ-45 connectors on the system end of the CAT-5e cables, following the T568A standard as shown. RJ-45 Using T568A Wiring Standard CAT-5e cable up to 300 ft (90 m) Y = Green PB = Blue PR = Red RJ-45 wall plate (optional) RJ-45 patch cable VMR1 Wall Wall box CAT-5e VMR1 Trim plate VMR1 installation detail 6. Make sure the VM1 Video Matrix is turned off. [. . . ]