User manual RYOBI 100R-SERIALS-210018251-THRU-

[. . . ] Failure to comply can result in accidents involving fire, electric shock or serious personal injury. Save owners manual and review frequently for continuing safe operation and instructing others who may use this tool. The operation of any tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. [. . . ] Everyday eyeglasses have only impact resistant lenses, they are not safety glasses. Wear hearing protection during extended periods of operation. Keep proper footing and balance at all times. Do not use tool on a ladder or unstable support. Secure tools when working at elevated levels. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Form a habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. Normal sparking of the motor could ignite fumes. KEEP HANDLES DRY, CLEAN AND FREE FROM OIL AND GREASE. Never use brake fluids, gasoline, petroleum based products, or any strong solvents to clean your tool. Make sure a tool is only connected to the voltage marked on its name plate. Never use a tool if the cover or any bolts are missing. If the cover or bolts have been removed, replace them prior to use. Maintain all parts in good working order. Always secure tools when working at elevated positions. Never start a tool when its rotating component is in contact with the workpiece. Do not touch the sanding disc or work piece immediately after operation. SWITCH This tool starts by pushing the switch forward. Always place the thumb of finger on the switch when operating so that the grinder can be switched off quickly in case of emergency. Grinding Wheel Grinding Clamp Nut INSTALLATION OF GRINDING WHEEL To assemble the grinding wheel, attach the disc flange, grinding wheel and the clamp nut to the spindle shaft. Be sure the disc flange is properly seated on the spindle shaft. Depress the spindle lock button located on top of the gear case. [. . . ] In order to obtain guarantee service, the owner must present the sales docket and Guarantee Certificate to confirm date of purchase. This product is sold by the dealer or agent as principal and the dealer has no authority from the Company to give any additional guarantee on the Company's behalf except as herein contained or herein referred to. Guarantee Conditions This guarantee only applies provided that the Product has been used in accordance with the manufacturer's recommendations under normal use and reasonable care (in the opinion of the Company) and such guarantee does not cover damage, malfunction or failure resulting from misuse, neglect, abuse, or used for a purpose for which it was not designed or is not suited and no repairs, alterations or modifications have been attempted by other than an Authorised Service Agent. This guarantee will not apply if the tool is damaged by accident or if repairs arise from normal wear and tear. [. . . ]