User manual RYOBI 1100W IMPACT DRILL EID1102RG

[. . . ] EID1102RG IMPACT DRILL OWNER'S OPERATING MANUAL DESCRIPTION 1. Gear setting switch 6 3 18 10 7 17 19 2 4 8 16 11 5 1 18 5 1 2 Fig. 8 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. English GENERAL POWER TOOL SAFETY WARNINGS 3. [. . . ] Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. , in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Recommended for the use of a residual current device with a rated residual current of 30 mA or less. SPECIFICATIONS Voltage Chuck capacity Drilling capacity in wood in steel in masonry Input No-load speed Blows per minute Weight 50 mm 13 mm 20 mm 1100 W 0 - 1, 200 / 0 - 3, 200 min-1 0 - 19, 000 / 0 - 51, 000 min-1 3. 38 kg 240 V 50 Hz 13 mm (1/2") STANDARD ACCESSORIES Auxiliary handle and depth gauge. SPECIAL SAFETY RULES Wear ear protectors. Exposure to noise can cause hearing loss. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. If operation is dusty, also wear a dust mask. Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. This appliance is not intended for use by young children or infirm persons. Adequate supervision by a responsible person must be provided to ensure that they do not play with the appliance. Visitors should wear safety glasses and be kept a safe distance from work area. Do not let visitors contact tool or extension cord. 2 OPERATION APPLICATIONS (Use only for the purposes listed below. ) Drilling wood, materials and resin boards. Drilling concrete (impact drilling only). [. . . ] " and " BIT STORAGE See Figure 7. The auxiliary handle also contains a compartment to store drill bits. To access this compartment unscrew the end cap below the grey trim on the handle in an anticlockwise direction. For easy changing of the drill bit this drill is equipped with an automatic spindle lock which holds the spindle stationary when loosening and tightening the chuck. [. . . ]