User manual RYOBI 180W DETAIL SANDER KIT EDS180K

[. . . ] Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. WARNING: Do not attempt to operate this tool until you have read thoroughly and understood completely, safety rules, etc. Failure to comply can result in accidents involving fire, electric shock or serious personal injury. Save owners manual and review frequently for continuing safe operation and instructing others who may use this tool. [. . . ] Watch what you are doing and use common sense. Before further use of the tool, a guard or any other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or any other part that is damaged should be properly repaired or replaced by an authorised service centre. DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by authorised service centre. DO NOT OPERATE THIS TOOL WHILE UNDER THE INFLUENCE OF DRUGS, ALCOHOL OR ANY MEDICATION. THE APPLIANCE IS NOT INTENDED FOR USE BY YOUNG OR INFIRM PERSONS WITHOUT SUPERVISION. YOUNG CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE Due to continued product refinement policy, product features and specifications can and will change without notice. Check current features and specifications with your retailer. Page 1 2 FEATURES 1 4 2 3 5 1. Sanding Sheet Page 3 2 APPLICATIONS You may use the sander for the purposes listed below: Sanding on wood surfaces. Removing rust from and sanding steel surfaces. Polishing and scrubbing porcelain and metal. CHOOSE SANDING PAPER CAREFULLY FOR EACH APPLICATION FOR BEST OPERATION AND FINISH. OPERATION CAUTION: Keep the cord away from the sanding pad and position the cord so that it will not be caught on timber, tools or other objects during sanding. WARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings or loose particles being thrown into your eyes, resulting in possible serious injury. 2) Follow these steps to turn the sander ON/OFF. Turn on the sander: Push the slider switch forward. Turn off the sander: Push the slider switch backward. ASSEMBLY ATTACHING HOOK AND LOOP SANDING PAPER (Fig. Align holes in hook and loop type sanding sheet with holes in pad, then carefully press fuzzy side of sanding sheet against pad as tightly as possible. Note: Hook and loop type sanding sheet can be reused for the life of the sanding abrasive. It is recommended that you keep the sanding pad clean to provide best adhesion. Clean occasionally by brushing lightly with a small brush. I O Fig. 1 Follow these steps to operate the sander. [. . . ] Guarantee Conditions This guarantee only applies provided that the Product has been used in accordance with the manufacturer's recommendations under normal use and reasonable care (in the opinion of the Company) and such guarantee does not cover damage, malfunction or failure resulting from misuse, neglect, abuse, or used for a purpose for which it was not designed or is not suited and no repairs, alterations or modifications have been attempted by other than an Authorised Service Agent. This guarantee will not apply if the tool is damaged by accident or if repairs arise from normal wear and tear. The Company accepts no additional liability pursuant to this guarantee for the costs of travelling or transportation of the Product or parts to and from the service dealer or agent - such costs are not included in this guarantee. Certain legislation, including the Trade Practices Act, 1974 (as amended) and other state and territorial laws give rights to the buyer and impose liability on the seller in certain circumstances. [. . . ]