User manual RYOBI 20002

[. . . ] Inspect the heat gun cable regularly and if damaged, have it repaired by authorized service centre. When the heat gun is used outdoors, use only extension cables that are suitable or exterior use. When working on small or irregular shaped objects, clamp the object in a vice or clip. Ensure the tool switch is at OFF position before plugging in. [. . . ] Ensure that the heat gun is always clean, dry and free from oil or grease. Never force the tool or accessories, and only use them for the purpose for which they are designed. Always keep the heat gun upright or suspend it with the stand supplied. Never use the heat gun in a damp or very wet area (for example: bathrooms, saunas). Never leave the heat gun out in the rain and do not use it on very damp days. Never push anything down inside the hot air nozzle. Always allow the heat gun to cool down completely before storing it. Always store the heat gun in a safe place, out of the reach of children. This device shall connect to such power supply network which impedance equal to or less than 0. 063 + j0. 039 or the agreement of power supplier or user, any misconnection may cause high voltage fluctuation. WARNING: Always concentrate on the job and use common sense when working with this or any other tools. Do not use this tool when you are tired or taking medication that may make you drowsy. NB: Keep the nozzle at least 10 cm away from the working surface. Soon, the paint should wrinkle and blisters start to form. Do not overheat the paint as this may burn it and make it more difficult to remove. Always wear eye protection when stripping paint overhead. Start by warming the surface just in front of the scraper uniformly by moving the heat gun slightly from side to side. If you heat the paint properly, you will be able to strip even the thickest paint in one pass. The paint should come off in strips the same width as the scraper. Clean the scraper blade frequently to keep it clean and sharp and to prevent a build-up of paint on the scraper. Remove the paint while it is still soft, as it hardens rapidly. You can strip moulded surfaces with a wire brush after softening the paint with the hot air. Protect surfaces that should not be heated using nonflammable material. Avoid directing the heat from the heat gun onto windows or other glass surfaces. [. . . ] Should service become necessary during the warranty period, the owner should contact the RYOBI HELPLINE 1300 361 505 or contact the retailer from whom the product was purchased. In order to obtain guarantee service, the owner must present the sales docket and Guarantee Certificate to confirm date of purchase. This product is sold by the dealer or agent as principal and the dealer has no authority from the Company to give any additional guarantee on the Company's behalf except as herein contained or herein referred to. Guarantee Conditions This guarantee only applies provided that the Product has been used in accordance with the manufacturer's recommendations under normal use and reasonable care (in the opinion of the Company) and such guarantee does not cover damage, malfunction or failure resulting from misuse, neglect, abuse, or used for a purpose for which it was not designed or is not suited and no repairs, alterations or modifications have been attempted by other than an Authorised Service Agent. [. . . ]