User manual RYOBI 500W JIGSAW EJS500RG

[. . . ] EJS500RG JIGSAW OWNER'S OPERATING MANUAL DESCRIPTION 1. Switch Lock-on button Safety guard Base Degree marks Saw blade Dust blower button Dust port (connect to dust extraction system, not included) Roller guide 10. 8 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. English GENERAL POWER TOOL SAFETY WARNINGS 3. [. . . ] This will ensure that the safety of the power tool is maintained. Recommended for the use of a residual current device with a rated residual current of 30 mA or less. SPECIFICATIONS Voltage Input power Stroke per minute Stroke length Max cutting capacity Wood Steel 65 mm 6 mm 240 V 500 W 3000 min-1 19 mm 50 Hz FEATURES KNOW YOUR SAW Before attempting to use your saw, familiarize yourself with all operating features and safety requirements. ELECTRICAL CONNECTION Your saw has a precision built electric motor. It should be connected only to a power supply of the type specified by its rating plate. Do not operate this tool on direct current (DC). A substantial voltage drop will cause a loss of power and overheating. If your tool does not operate when plugged into an outlet, double-check the power supply. SPECIAL SAFETY RULES It is advised to wear a dusk mask. Wait for the cutter to stop before setting the tool down. An exposed cutter may engage the surface leading to possible loss of control and serious injury. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. This appliance is not intended for use by young children or infirm persons. Adequate supervision by a responsible person must be provided to ensure that they do not play with the appliance. Visitors should wear safety glasses and be kept a safe distance from work area. Do not let visitors contact tool or extension 2 WARNING Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. OPERATION SWITCH See Figure 1. To turn your saw ON, depress the switch. Release trigger switch to turn your saw OFF. Your saw is equipped with a lock-on feature, which is convenient when continuous cutting for extended periods of time is required. [. . . ] Use extreme caution in disposing of oily cloth after completion of job to prevent potential fire hazard. With the air jet of the sawdust blower device, the cutting line can be kept free of dust and chips. Switching on the sawdust blower device: For cuts in materials with high removal rate, such as in wood, plastic, etc. Switching off the sawdust blower device: For cuts in metal and when a dust extraction system (not included) is connected. [. . . ]