User manual RYOBI 725RE-SERIALS-909019670-AND-UP

[. . . ] Keep proper footing and balance at all times. Do not use tool on a ladder or unstable support. Secure tools when working at elevated levels. Keep tools sharp and clean for better and safer performance. [. . . ] KEEP HANDLES DRY, CLEAN AND FREE FROM OIL AND GREASE. Never use brake fluids, gasoline, petroleum based products, or any strong solvents to clean your tool. Watch what you are doing and use common sense. Before further use of the tool, a guard or any other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or any other part that is damaged should be properly repaired or replaced by an authorised service centre. DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by authorised service centre. DO NOT OPERATE THIS TOOL WHILE UNDER THE INFLUENCE OF DRUGS, ALCOHOL OR ANY MEDICATION. THE APPLIANCE IS NOT INTENDED FOR USE BY YOUNG OR INFIRM PERSONS WITHOUT SUPERVISION. YOUNG CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE. 1. It can also be used for sanding timber smooth. MOUNTING THE SANDING PAD (Fig. 4) polisher Remove the guard for sanding applications. Attach the sanding pad the sanding disc and clamp nut to the spindle shaft. Disc flange is not necessary for this sanding application. 8500 MOUNTING THE WOOL BONNET (Fig. 5) Unplug your grinder sander polisher. Remove the guard for polishing applications. Attach the sanding pad and clamp nut to the spindle shaft. Depress the spindle lock button on the right hand side of the gear case. Tighten the sanding pad in a clockwise direction by hand. Cover the sanding pad with the wool bonnet. 6 RYOBI TECHNOLOGIES AUSTRALIA PTY. LTD. GUARANTEE Subject to the guarantee condition below, this Ryobi tool (hereinafter called "the product") is guaranteed by Ryobi (hereinafter called "the Company") to be free from defects in material or workmanship for a period of 24 months from the date of original purchase covering both parts and labour. [. . . ] In order to obtain guarantee service, the owner must present the sales docket and Guarantee Certificate to confirm date of purchase. This product is sold by the dealer or agent as principal and the dealer has no authority from the Company to give any additional guarantee on the Company's behalf except as herein contained or herein referred to. Guarantee Conditions This guarantee only applies provided that the Product has been used in accordance with the manufacturer's recommendations under normal use and reasonable care (in the opinion of the Company) and such guarantee does not cover damage, malfunction or failure resulting from misuse, neglect, abuse, or used for a purpose for which it was not designed or is not suited and no repairs, alterations or modifications have been attempted by other than an Authorised Service Agent. This guarantee will not apply if the tool is damaged by accident or if repairs arise from normal wear and tear. [. . . ]