User manual RYOBI 750W RANDOM ORBITAL SANDER KIT ERO750VK

[. . . ] SAVE THIS MANUAL FOR FUTURE REFERENCE. RULES FOR SAFE OPERATION The purpose of safety rules is to attract your attention to possible dangers. The safety symbols and the explanations with them, require your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instruction or warnings they give are not substitutes for proper accident prevention measures. [. . . ] Before further use of the tool, a guard or any other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or any other part that is damaged should be properly repaired or replaced by an authorised service centre. 20. DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by authorised service centre. 21. DO NOT OPERATE THIS TOOL WHILE UNDER THE INFLUENCE OF DRUGS, ALCOHOL OR ANY MEDICATION. 22. THE APPLIANCE IS NOT INTENDED FOR USE BY YOUNG OR INFIRM PERSONS WITHOUT SUPERVISION. YOUNG CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE Due to continued product refinement policy, product features and specifications can and will change without notice. Check current features and specifications with your retailer. Page 1 FEATURES 1 2 3 6 4 5 1. Hook and Loop Pad Page 2 APPLICATIONS You may use the random orbital sander for the purposes listed below: Sanding on wood surfaces. Removing rust from and sanding steel surfaces. Sanding plastics. INSTALLING SANDPAPER Inspect sandpaper before installing. DO NOT use broken or defective sandpaper. Unplug your sander. WARNING: Failure to unplug your sander could result in accidental starting causing possible serious personal injury. Holes in sandpaper must line up with holes in backing pad in order for the dust collection feature of your sander to function properly. Note: DO NOT use sander without sandpaper. Doing so will damage the cushion. FEATURES Your sander is suitable for sanding with coarse, medium, and fine grit sandpaper. It will produce a fine scratch free finish when used to sand with the grain on wood surfaces. Before attempting to use your sander, familiarize yourself with all operating features and safety requirements. SWITCH To turn the tool on, squeeze the trigger switch. To turn the tool off, release the trigger switch. The trigger is spring loaded and will return to the off position automatically. PREPARING FOR OPERATION CAUTION: Be careful not to let your hand completely cover air vents. LOCK ON BUTTON The sander is equipped with a lock on button which is designed for continuous sanding for extended periods. This button locks the trigger switch on so you can focus on your work. [. . . ] Also follow the recommendations of the coatings manufacturers. Fig. 4 USING THE DUST BAG ASSEMBLY The dust bag assembly provides a dust collection system for the sander. Sanding dust is drawn up through the holes of the sanding disc and collected in the dust bag during sanding. Fig. 5 Page 4 RYOBI TECHNOLOGIES AUSTRALIA PTY. [. . . ]