User manual RYOBI 760R-SERIALS-301090419-THRU

[. . . ] Failure to comply can result in accidents involving fire, electric shock or serious personal injury. Save owners manual and review frequently for continuing safe operation and instructing others who may use this tool. The operation of any tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. [. . . ] Don't force small tool or attachment to do the job of a heavy duty tool. Don't use tool for purpose not intended. Do not wear loose clothing or jewellery. Rubber gloves and non-skid footwear are recommended when working outdoors. Also wear protective hair covering to contain long hair. Everyday eyeglasses have only impact resistant lenses, they are not safety glasses. Wear hearing protection during extended periods of operation. Keep proper footing and balance at all times. Do not use tool on a ladder or unstable support. Secure tools when working at elevated levels. Keep tools sharp and clean for better and safer performance. The locking sleeve and adjusting sleeve come out of the gear case as a unit. If it is difficult to remove by hand, use pliers. hole of the spindle until the ball-lock of the bit holder snaps into the groove in the gear case then push in the adjusting sleeve as far as it will go. Fig 3. Reversing Switch Trigger Lock-On Button DEPTH SETTING (Fig 4. ) 1. The tool's adjustable nose piece enables you to automatically drive a screw to a preset depth. To adjust your screw driver so it will drive screws to the desired depth, unlock the locking sleeve. Turn the adjusting sleeve to the appropriate bit holder depth or to any desired depth. Test the driver by screwing in a fastener in scrap material to determine whether the screwing depth is correctly adjusted. Further adjustment may be necessary to increase or decrease the screwing depth. Adjusting Sleeve Locking Sleeve Adjusting Sleeve Fig 4. Bit Holder Fig 2. This tool is started and stopped by depressing and releasing the trigger. If you want to set a constant speed for continuous operation, press the lock-on button while the trigger is depressed. [. . . ] Should service become necessary during the warranty period, the owner should contact the Authorised Ryobi Retailer from whom the Product was purchased, or the nearest Company Branch Office. In order to obtain guarantee service, the owner must present the sales docket and Guarantee Certificate to confirm date of purchase. This product is sold by the dealer or agent as principal and the dealer has no authority from the Company to give any additional guarantee on the Company's behalf except as herein contained or herein referred to. Guarantee Conditions This guarantee only applies provided that the Product has been used in accordance with the manufacturer's recommendations under normal use and reasonable care (in the opinion of the Company) and such guarantee does not cover damage, malfunction or failure resulting from misuse, neglect, abuse, or used for a purpose for which it was not designed or is not suited and no r e p a i r s , a l t e r a t i o n s o r modifications have been attempted by other than an Authorised Service Agent. [. . . ]