User manual RYOBI 764R

[. . . ] This enables better control of the power tool in unexpected situations. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. [. . . ] Water entering a power tool will increase the risk of electric shock. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. If operating power tools in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. English hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. The speed can be adjusted by controlling the force applied to the trigger. The maximum speed of the drill may be set at different speeds by adjusting the variable speed selector. For continuous operation, press the lock-on button while squeezing the trigger. Squeeze the trigger again to release the lock. CHANGING THE ROTATION DIRECTION See Figure 2. To change the direction of rotation, stop the tool and push the forward / reverse selector. When the forward selector is pushed in, the bit rotates clockwise when viewed from the handle end of the tool. English When the reverse selector is pushed in, the bit rotates counterclockwise. MOUNTING AND REMOVING THE BIT See Figure 4. Insert the drill bit into the chuck as far as the plain part of its shank will go. Tighten the chuck securely by rotating the chuck head in a clockwise direction. The bit can be removed by rotating the chuck in a counterclockwise direction. [. . . ] Depth gauge Holes of a fixed depth can be accurately bored by using the depth gauge. The depth of the hole will be the distance from the end of the bit to the end of the depth gauge. By turning the handle grip in direction, the depth gauge can be released and the depth adjusted. After adjusting the depth, fix the depth gauge again by turning the handle grip in direction. LIVE TOOL INDICATOR This tool features a live tool indicator which illuminates as soon as the tool is connected to the supply. [. . . ]