User manual RYOBI 764R-SERIALS-103036646-THRU-203096320

[. . . ] Everyday eyeglasses have only impact resistant lenses, they are not safety glasses. OWNER'S OPERATING MANUAL Wear a dust mask if operation is dusty. Wear hearing protection during 550W IMPACT DRILL of operation. Keep proper footing and balance at warning. [. . . ] Don't use tool for purpose not If you use your impact drill properly and only for what it isand specifications can and will safe, intended, you will enjoy years of intended. Do not wear loose clothing or jewellery. current features and specifications They You caught for buying Rubber tools. Thankcan be againin moving parts. Ryobi gloves and nonskid footwear are recommended when working outdoors. wear protective hair covering to contain long hair. SAVE THIS MANUAL FOR FUTURE REFERENCE. RULES FOR SAFE OPERATION The purpose of safety rules is to attract your attention to possible dangers. The safety symbols and the explanations with them, require your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instruction or warnings they give are not substitutes for proper accident prevention measures. May be used in conjunction with other symbols or pictures. WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. Keep proper footing and balance at all times. Do not use tool on a ladder or unstable support. Secure tools when working at elevated levels. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Form a habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. Normal sparking of the motor could ignite fumes. KEEP HANDLES DRY, CLEAN AND FREE FROM OIL AND GREASE. Never use brake fluids, gasoline, petroleum based products, or any strong solvents to clean your tool. Watch what you are doing and use common sense. Before further use of the tool, a guard or any other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. [. . . ] For deep holes, frequently remove the tool to exhaust chips from the hole. To drill with impact, only use drills with carbide tip and negative cut angle on the lip. Carbide tip drills should only be sharpened with silicone carbide wheels. To work WITHOUT HAMMER, as a normal drill, turn the lever to the point where a drill is printed. [. . . ]