User manual RYOBI 767RJ-767R-41CD767G034-41CD76JG034-41DD76JG034

[. . . ] 9. Keyless chuck Torque adjustment ring with mode selector Two speed gear selector (HI-LO) Bit storage area Direction of rotation selector (forward/reverse) Switch trigger Battery pack Auxiliary handle LCD battery capacity indicator 1 2 3 6 5 8 9 Battery Charger 7 4 Green Light Red Light Yellow and Green Light Battery charger Battery Pack Neck Battery pack Fig. 1 Centre position (lock) Direction of rotation selector Battery Port Fig. 2 Hi speed(2) Lo speed(1) Switch trigger To increase torque Fig. 3 Unlock (release) Chuck jaws Drill bit Lock (tighter) Chuck sleeve To decrease torque Adjusting ring Fig. [. . . ] Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. WARNING: Page 2 RULES FOR SAFE OPERATION When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contact eyes, additionally seek medical help. Liquid ejected from the battery may caused irritation or burns. SERVICE Have your power tool serviced by an authorised service centre using only identical replacement parts. This will ensure that the safety of the power tool is maintained. MAINTENANCE Your power tool requires no additional lubrication or maintenace. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. This is normal and does not indicate a problem. Dot not place the charger in an area of extreme heat or cold. It will work best at normal room temperature. When the batteries become fully charged, the green light on charger will turn on. Unplug the charger from power supply and remove the battery pack. LED FUNCTION OF CHARGER Red Green and yellow Green Fast charging mode Control charge or defective Fully charged TO INSTALL BATTERY PACK (fig. 2) Lock the switch trigger by placing the direction of rotation selector in the central position. To install, insert battery pack neck into drill's battery port, making sure the latches on each side snap into place and battery pack is secure before beginning operation. To remove, locate latches on side of battery pack and depress both sides to release battery pack from drill. LCD BATTERY CAPACITY INDICATOR The display is for guidance only. Deviations are possible for extreme applications. [. . . ] WOOD DRILLING For maximum performance, use high speed steel bits for wood drilling. Turn the torque adjustment ring on the drill to desired torque setting. Begin drilling at a very low speed to prevent the bit from slipping off the starting point. Increase the speed as the drill bit bites into the material. [. . . ]