User manual RYOBI APR-02 SCHEMA

[. . . ] WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. WARNING: Do not attempt to operate this tool until you have read thoroughly and understood completely safety rules, etc. Failure to comply can result in accidents involving fire, electric shock or serious personal injury. [. . . ] Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. , in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. Always wear safety goggles and a dust mask when sanding, especially sanding over-head. the machine is not suitable for wet sanding. Do not use sanding paper larger than needed. Extra paper extending beyond the sanding pad can also cause serious lacerations. The dust bag shall be equipped with the tool. WARNING Do not throw sanding dust on an open fire because materials in fine particle form may be explosive. Note: Hook and loop type sanding discs can be reused for the life of the sanding abrasive. It is recommended that you keep the sanding disc backing pad clean to provide for best adhesion. Clean occasionally by brushing lightly with a small brush. WARNING The sander should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, perfor ming maintenance, or when the tool is not in use. Disconnecting the tool will prevent accidental starting that could cause serious injury. WARNING The tool should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use. Disconnecting the tool will prevent accidental starting that could cause serious injury. SANDING DISC SELECTION Selecting the correct size, grit and type of sand paper is extremely important step in achieving a high quality sanded finish. Sanding dust is drawn up through the holes of the sanding disc and collected in the dust bag during sanding. Using a slight twisting motion as shown in figure 3, firmly slide dust bag assembly in blower exhaust on sander. WARNING Exercise caution when using this tool. [. . . ] WARNING Keep your head away from the sander and the sanding area. Your hair could be drawn into the sander causing serious injury. Follow these steps to empty the dust bag: This tool features a live tool indicator (6) which illuminates as soon as the tool is connected to the supply. This warns the user that the tool is connected and will operate when the switch is pressed. [. . . ]