User manual RYOBI BDT96 ACCESSOIRES

[. . . ] 7-8 n Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-12 n Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-15 n Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-18 n Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Scouring the surface requires a more direct spray of water. Select the yellow 15° or red 0° nozzle for tough jobs. Apply detergent using the black nozzle. LOCK OUT Fig. 14 NOZZLE CAUTION: NEVER change nozzles without locking the lock out on the spray wand. Using the quick-connect collar, changing nozzles to easy. n Turn off the pressure washer and shut off the water supply. To connect a nozzle to the spray wand: n Engage the lock on the wand by pushing up on the lock out until it clicks into the slot. n Insert the desired nozzle then release the collar. Tug on the nozzle to be certain it is secured properly. n Release the lock out on the wand by pushing it down into its original position. To disconnect a nozzle from the spray wand once the cleaning job is complete: n Engage the lock out on the wand by pushing up on the lock out until it clicks into the slot. n Spray the detergent on a dry surface using long, even, overlapping strokes. To prevent streaking, do not allow the detergent to dry on the surface. Before shutting off the engine: n Place the injection hose in a bucket of clean water. n Flush for 1 - 2 minutes (spray clear water through the spray wand). NOTE: Shutting OFF ( O ) the engine will not relieve pressure in the system. 17 RINSING WITH THE PRESSURE WASHER n Turn off the pressure washer and shut off the water supply. n Engage the lock out on the wand by pushing up on the lock out until it clicks into the slot. n Remove the nozzle by pulling it from the collar. n Select the right nozzle for the job: · Use lower pressure nozzle (white or green) to wash items such as a car or boat. · Use higher pressure nozzle (yellow or red) for jobs such as stripping paint and degreasing the driveway. When using these nozzles, test a small area first to avoid surface damage. [. . . ] product that has been subject to misuse, neglect, negligence, or accident, or that has been operated in any way contrary to the operating instructions as specified in the Ryobi Technologies, Inc. This warranty does not apply to any damage to the Ryobi Technologies, Inc. product that is the result of improper maintenance or to any Ryobi Technologies, Inc. product that has been altered or modified so as to adversely affect the products operation, performance or durability or that has been altered or modified so as to change its intended use. [. . . ]