User manual RYOBI CAG-180

[. . . ] Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or batteryoperated (cordless) power tool. [. . . ] Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. 7 d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. , in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. Teknisk tillverkningsdokumentation finns hos: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. NL S DK CE KONFORMITETSERKLRING Vi erklrer under almindeligt ansvar, at dette produkt er i overensstemmelse med flgende normer eller normative dokumenter: EN 60 745, EN 55 014, i henhold til bestemmelserne i direktiverne 2006/95/EF, 2004/108/EF, 98/37/EF (indtil 28. 12. 2009), 2006/42/EF (fra 29. 12. 2009). STJ/VIBRATION Mles efter EN 60 745 er lydtrykniveau af dette vrktj 85 dB(A) og lydeffektniveau 96 dB(A) (standard deviation: 3 dB), og vibrationsniveauet 14 (7370) / 11 (CAG-180) m/s2 (hnd-arm metoden; usikkerhed K = 1, 5 m/s2). Teknisk dossier hos: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. N CE SAMSVARSERKLRING Vi erklrer at det er under vrt ansvar at dette produkt er i samsvar med flgende standarder eller standard- dokumenter: EN 60 745, EN 55 014, i samsvar med reguleringer 2006/95/EF, 2004/108/EF, 98/37/EF (frem til 28. 12. 2009), 2006/42/EF (fra 29. 12. 2009). STY/VIBRASJON Mlt iflge EN 60 745 er lydtrykknivet av dette verktyet 85 dB(A) og lydstyrkenivet 96 dB(A) (standard deviasjon: 3 dB), og vibrasjonsnivet 14 (7370) / 11 (CAG-180) m/s2 (hnd-arm metode; usikkerhet K = 1, 5 m/s2). Tekniske underlag hos: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. FIN CE TODISTUS STANDARDINMUKAISUUDESTA Todistamme tten ja vastaamme yksin siit, ett tm tuote en allalueteltujen standardien ja standardoimisasiakirjojen vaatimusten mukainen EN 60 745, EN 55 014, seuraavien sntjen mukaisesti 2006/95/EY, 2004/108/EY, 98/37/EY (28. 12. 2009 asti), 2006/42/EY (29. 12. 2009 alkaen). MELU/TRIN Mitattuna EN 60 745 mukaan tykalun melutaso on 85 dB(A) ja yleens tykalun nen voimakkuus on 96 dB(A) (keskihajonta: 3 dB), ja trinn voimakkuus 14 (7370) / 11 (CAG-180) m/s2 (ksi-ksivarsi metodi; epvarmuus K = 1, 5 m/s2). Tekninen tiedosto kohdasta: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. E CE DECLARACION DE CONFORMIDAD Declaramos bajo nuestra sola responsabilidad que este producto est en conformidad con las normas o documentos normalizados siguientes: EN 60 745, EN 55 014, de acuerdo con las regulaciones 2006/95/CE, 2004/108/CE, 98/37/CE (hasta el 28. 12. 2009), 2006/42/CE (a partir del 29. 12. 2009). RUIDOS/VIBRACIONES Medido segn EN 60 745 el nivel de la presin acstica de esta herramienta se eleva a 85 dB(A) y el nivel de la potencia acstica 96 dB(A) (desviacin estndar: 3 dB), y la vibracin a 14 (7370) / 11 (CAG-180) m/s2 (mtodo brazo-mano; incertidumbre K = 1, 5 m/s2). Expediente tcnico en: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. 08 RYOBI Europe BV A. Kloot 97 P CE DECLARAO DE CONFIRMIDADE Declaramos sob nossa exclusiva responsabilidade que este producto cumpre as seguintes normas ou documentos normativos: EN 60 745, EN 55 014, conforme as disposies das directivas 2006/95/CE, 2004/108/CE, 98/37/CE (at 28. 12. 2009), 2006/42/CE (a partir de 29. 12. 2009). RUDO/VIBRAES Medido segundo EN 60 745 o nvel de presso acstica desta ferramenta 85 dB(A) e o nvel de potncia acstica 96 dB(A) (espao de erro: 3 dB), e a vibrao 14 (7370) / 11 (CAG-180) m/s2 (mtodo brao-mo; incerteza K = 1, 5 m/s2). [. . . ] : RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. RU UA GR CE YMBATOT : EN 60 745, EN 55 014, 2006/95/EK, 2004/108/EK, 98/37/EK ( 28. 12. 2009), 2006/42/EK ( 29. 12. 2009). Y / Y EN 60 745 85 dB(A) o 96 dB(A) ( : 3 dB), 14 (7370) / 11 (CAG-180) m/s2 ( / - K = 1, 5 m/s2). : RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. 08 RYOBI Europe BV A. Kloot 98 RO DECLARAIE DE CONFORMITATE CE Declarm pe proprie rspundere c acest product este conform cu urmtoarele standarde sau documente standardizate: EN 60 745, EN 55 014, n conformitate cu regulile 2006/95/CE, 2004/108/CE, 98/37/CE (pn la 28. 12. 2009), 2006/42/CE (ncepnd cu 29. 12. 2009). [. . . ]