User manual RYOBI CBD-1201

[. . . ] Your new radio charger has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. CAUTION: Carefully read through this entire operator's manual before using your new radio charger. Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. [. . . ] Object and Liquid Entry ­ Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Damage Requiring Service ­ Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: A) When the power-supply cord or plug is damaged, B) If liquid has been spilled, or objects have fallen into the product, C) If the product has been exposed to rain or water, D) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, E) If the product has been dropped or damaged in any way, and F) When the product exhibits a distinct change in performance ­ this indicates a need for service. Safety Check ­ Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Wall or Ceiling Mounting ­ This product should be mounted to a wall or ceiling only as recommended by the Manufacturer. Heat ­ The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. Page 3 IMPORTANT SAFETY INSTRUCTIONS Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL MEANING SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. May be used in conjunction with other symbols or pictographs. DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. CAUTION: Failure to obey a safety warning may result in property damage or personal injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment. SAVE THESE INSTRUCTIONS Page 5 RULES FOR SAFE OPERATION READ ALL INSTRUCTIONS READ THESE INSTRUCTIONS AND THE INSTRUCTIONS FOR YOUR HP962 DRILL-DRIVER THOROUGHLY before using this radio charger. DO NOT CONNECT YOUR RADIO CHARGER TO POWER SUPPLY UNTIL YOU HAVE READ AND UNDERSTOOD ALL PRECAUTIONS AND OPERATING INSTRUCTIONS IN THIS MANUAL AND PRINTED ON RADIO CHARGER. Learn its applications and limitations as well as the specific potential hazards related to this radio charger. Always wear eye protection which is marked to comply with ANSI Z87. 1. Page 6 FEATURES KNOW YOUR RADIO CHARGER See Figure 1. Before attempting to use this product, familiarize yourself with all operating features and safety requirements. Features include easily operated am/fm radio; built-in charger; tool rest for your drill-driver and bit storage compartment. UNPACKING Your radio charger has been shipped completely assembled. Inspect it carefully to make sure no breakage or damage has occurred during shipping. [. . . ] Failure to do so can result in fire, explosion, or personal injury. WARNING: To reduce risk of injury, charge only the recommended nickel-cadmium type rechargeable batteries. Other types of batteries may burst causing personal injury and damage. UPPER SIDE UPPER SIDE IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES When using your drill-driver continuously, the batteries in your battery pack become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge. Note: This situation occurs when continuous use of your drill-driver causes the batteries to become hot. [. . . ]