User manual RYOBI CM30 SCHEMA ELECTRIC

[. . . ] No part of these documents may be duplicated or transmitted for any purpose whatsoever without express written permission of United Navigation GmbH. 1, 73760 Ostfildern, Germany, provides a world-wide, 24-month warranty (battery: 6 months) for RYOBI units, beginning on the day of delivery to the final customer (buyer). Within the framework of the warranty, functional defects will be eliminated free-of-charge, provided that these can be shown to be the result of material or manufacturing faults and this shall be effected either by elimination of the fault or by provision of a new unit, at the discretion of the manufacturer. Warranty claims must be registered by the buyer immediately after defects are discovered and must be accompanied by the initial buyer's purchase contract. [. . . ] > Press Zoom out to "zoom out from the map" and thus get a greater overview. > Press the button to display the entire section of the route. Warnings with planned route When the driver warnings function is activated in the navigation settings, you will be warned about road sections where there are relevant restrictions. 1 2 1 2 3 If there are road sections on your route that are subject to a restriction, your navigation system will warn you shortly before reaching the road sections affected. The layout of the message is similar as 73 >>> >D > GB >F >I > PL NAVIGATION MODE described in the chapter "Feedback after route calculation". You have the following options: 1 Press the button to close the message. 2 enlarge the display area if another restriction lies ahead of you. The message will close automatically once you have left the critical area. In addition, the message closes automatically when you approach a new road section with a restriction. Warnings without planned route When the driver warnings function is activated in the navigation settings, you will be warned about road sections where there are relevant restrictions. The function is similar as described in the chapter "Warning with planned route". Announce time of arrival Using the Announce time of arrival button you can switch the automatic announcement of the expected arrival times on ( ) or off ( ). > Confirm your settings by pressing the button. An automatic search procedure presets the transmitter with the best reception. The currently received TMC-transmitter appears on the display. The TMC announcements can be spoken by the voice, if the navigation settings in the Voice guidance menu the Announce TMC events option is activated. The following setting options are then available: · Voice You can select the voice that will make the navigation announcements for the language that has been set. Note: The Announce streets and Announce time of arrival functions are only supported by speakers with the TTS function. 76 NAVIGATION MODE Setting the Voice In the Voice settings window you can set the voice that will make the navigation announcements for the language that has been set. > In the Voice guidance settings window, press the Voice button. Setting the Volume With the Volume settings window, you can set the standard volume for voice announcements for each start of the Navigation device, or switch off voice announcements completely. Depending on the situation, this setting can be fitted into the map display. [. . . ] Interference caused by your unit affecting other electrical/electronic devices, as well as interfering influences on your unit from other electrical/electronic devices are largely prevented. NOTICE >>> >D > GB >F >I > PL The EC type-approval mark (E13) issued by Luxembourg's Road Traffic Registration Authority in accordance with European Directive ECE-R10 governing the EMC of motor vehicles in its current version authorises installation and operation of the unit in motor vehicles (classes L, M, N and O). EU Declaration of Conformity The United Navigation GmbH hereby declares that the navigation device described here isin compliance with the essential requirements of the EC directives and in particular is incompliance with the essential requirements and other relevant regulations of the R&TTEdirective 1999/5/EG. You can find a comprehensive EU Declaration of Conformity on our website http://www. [. . . ]