User manual RYOBI CM31 SCHEMA ELECTRIC

[. . . ] © Copyright 2011, United Navigation GmbH All rights reserved. 5 Warranty >>> >D > GB >F >I > PL WARRANTY 24-month warranty The company United Navigation GmbH, Marco-Polo-Str. 1, 73760 Ostfildern, Germany, provides a world-wide, 24-month warranty (battery: 6 months) for RYOBI units, beginning on the day of delivery to the final customer (buyer). Within the framework of the warranty, functional defects will be eliminated free-of-charge, provided that these can be shown to be the result of material or manufacturing faults and this shall be effected either by elimination of the fault or by provision of a new unit, at the discretion of the manufacturer. Warranty claims must be registered by the buyer immediately after defects are discovered and must be accompanied by the initial buyer's purchase contract. [. . . ] You can set one of the following options for each of these road types. Option Permitted Meaning With this option, the road type in question is included in calculating the route. With this option, the road type in question is not included in calculating the route. The TMC button You can configure settings for the reception of traffic announcements in the TMC settings window. The TMC settings window appears. Prohibited > Confirm your selection in the Route options window ny pressing the OK button. 66 NAVIGATION MODE Setting Rerouting >>> >D > GB >F >I > PL Meaning This button allows you to choose whether the route change should be made Never, Automatically or Manually. (See "Taking announcements into consideration when calculating routes" on page 76. ) The setting Never is equivalent to switching off the TMC function. The Voice guidance button In the Voice guidance settings window you can make settings relating to the voice guidance of the Navigation device. > Press the Voice guidance button in the settings menu. The Voice guidance settings window appears. · Volume You can select the standard volume for voice announcements for each start of the Navigation device, or switch off voice announcements completely. · Announce streets Using the Announce streets button you can switch the announcement of the names of streets into which you are to turn on ( ) or off ( ). · Announce time of arrival Using the Announce time of arrival button you can switch the automatic announcement of the expected arrival times on ( ) or off ( ). > Confirm your settings by pressing the button. An automatic search procedure presets the transmitter with the best reception. The currently received TMC-transmitter appears on the display. The TMC announcements can be spoken by the voice, if the navigation settings in the Voice guidance menu the Announce TMC events option is activated. The following setting options are then available: · Voice You can select the voice that will make the navigation announcements for the language that has been set. Note: The Announce streets and Announce time of arrival functions are only supported by speakers with the TTS function. 67 >>> >D > GB >F >I > PL NAVIGATION MODE Setting the Voice In the Voice settings window you can set the voice that will make the navigation announcements for the language that has been set. The Driver alerts settings window appears. The following signs are available in the individual categories: · Curve warnings This category includes warning signs that relate to sharp curves. · Traffic regulations This category includes other traffic regulations, such as no passing zones. · General warnings This category includes all other warning signs, such as steep gradients, falling rocks. · Informatory road signs This category contains the available information signs. > Confirm your settings by pressing the button. The available driver alerts are divided into 4 categories. The four categories can be enabled or disabled individually. The warning sound can be set individually for each of the four categories by pressing the symbol with the bell ( warning sound switched on). >>> >D > GB >F >I > PL 69 >>> >D > GB >F >I > PL NAVIGATION MODE Setting Speed info The Speed info settings window allows to select whether speed limits are displayed in parallel to the navigation. You can also receive an audible warning about exceeding the speed limit. Note: This information can only be displayed if it is contained in the map material. c The following settings are available. [. . . ] 125 128 MODEL OVERVIEW AND TECHNICAL SPECIFICATIONS Model overview and technical specifications >>> >D > GB >F >I > PL : standard - : not available : optional Navigation system Ready 50 Ready 50 EU 19 Active 50 Weight 195 g 195 g 200 g Processor in MHz 533 533 533 Flash memory 4 GB 2 GB 4 GB SD-RAM 128 MB 128 MB 128 MB Li-ion battery 1200 mAh 720 mAh 1200 mAh TMC Holder for vehicle integration Bluetooth hands-free device Dimensions in mm (W x H x D): 140 x 90 x 17 Display 12. 8 cm; touch screen with 65000 colours; reflection-proof; display resolution: 480 horizontal and 272 vertical Micro SD card reader Support class 6 SDHC max. 32 GB; format FAT32 USB interface USB Client 2. 0, Micro-USB 1 Internal loudspeaker 2. 5 Watt max. Supply voltage LPS (Limited Power Source); 5 volts / 1A via recharger cable 129 >>> >D > GB >F >I > PL NOTICE Dear customer, In conformance with current EC guidelines, any person may operate this unit. This unit conforms to the current valid European or harmonized national regulations. [. . . ]