User manual RYOBI CMI-1802M

[. . . ] Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Never carry the charger by the cord or yank it to disconnect it from the socket. Keep the cord away from heat, oil and sharp edges. [. . . ] Following this rule will reduce the risk of electric shock, fire, or serious personal injury. If this accidentally occurs, flush with water. If liquid contacts eyes additionally, seek medical help. Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury. wARNING Batteries vent hydrogen gas and can explode in the presence of a source of ignition , such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. Lock switch trigger on your drill by placing the direction of rotation selector in center position. Align raised rib on battery pack with groove inside drill. Make sure the latches on battery pack snap in place and battery pack is secured in drill before beginning operation. Model Voltage Chuck Switch No load speed (drill mode): - Lo speed - Hi speed No load speed (impact mode): - Lo speed - Hi speed Max. Battery pack Battery pack (not included) - 1. 7Ah Charger (not included) CMD-1802M 18 V 13 mm Variable speed CMI-1802M 18 V 13 mm Variable speed Lock switch trigger on your drill by placing the direction of rotation selector in center position. Locate latches of battery pack and depress to release battery pack from your drill. Lock the trigger switch by placing the rotation selector in the center position. The tool is equipped with an adjustable torque clutch for driving different types of screws into different materials. We recommend that you use carbide-tipped bits and select impact mode when drilling in hard material such as brick, tile, concrete, etc. cAUTION The impact drill is not designed for reverse hammering. Failure to obey this caution may result in property damage. " Note: If you have difficulty changing from one gear range to the other, turn the chuck by hand until the gears engage. CAUTION To prevent gear damage, always allow chuck to come to a complete stop before changing the speed or the direction of rotation. To turn it OFF, release the switch trigger. [. . . ] Abusive practices can damage tool as well as workpiece. WARNING Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. [. . . ]