User manual RYOBI ED-1138

[. . . ] Then, push the bit as far as it will go and lock it by pushing the stopper shaft to the opposite side. The bit can be removed by following the above method in reverse. [. . . ] Always secure tools when working in elevated positions. Never touch the blade, drill bit, grinding wheel or other moving parts during use. Never start a tool when its rotating component is in contact with the work piece. Never lay a tool down before its moving parts have come to a complete stop. ACCESSORIES : The use of accessories or attachments other than those recommended in this manual might present a hazard. Unless properly mounted, the bit may shoot out. Hold the tool securely with both hands while operating. The tool may recoil, causing injury to your hands, if not firmly held. Do not touch the bit as it becomes extremely hot during operation. Never point hammer bit towards any person. [. . . ] För att borra till önskat djup, ställ in djupstopparen så att avståndet till spetsen på borren motsvararar det önskade djupet. DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. [. . . ]