User manual RYOBI EID-1052RE

[. . . ] Never lay a tool down before its moving parts have come to a complete stop. ACCESSORIES: The use of accessories or attachments other than those recommended in this manual might present a hazard. Do not use power tools in damp or wet locations. [. . . ] An incorrectly mounted bit is extremely dangerous since it can fly off or break during drilling. Do not wear loose clothing or jewellery, they can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Wear protecting hair covering to contain long hair. hold the tool securely with both hands. If not held securely, accidents or injury may result. Never touch the chuck or metal body parts when drilling walls, floors, or other surfaces covering electrical wiring. hold the tool only by the plastic handle to prevent electric shocks. While operating, the work piece must be securely held with the vise or the clamp etc. Noise (sound pressure level) in the workplace can exceed 85 dB(A). In this case, sound insulation and hearing protection measures must be taken by the operator. This tool is started and stopped by pressing and releasing the trigger switch (A). The speed can be adjusted in the high gear or in the low gear, by controlling the trigger-pressing force. For continuous operation, press the lock button (E) while pressing the trigger. [. . . ] the gear setting button (H) is on the left side of the housing. When the button is in position "1" the tool is in the low gear. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. [. . . ]