User manual RYOBI EID-750RE

[. . . ] ACCESSORIES: The use of accessories or attachments other than those recommended in this manual might present a hazard. When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. Do not use power tools in damp or wet locations. [. . . ] have defective switches replaced by an authorized service facility. Do not use the tool if the switch does not turn it on and off. make sure that the drill bit is securely mounted. An incorrectly mounted bit is extremely dangerous since it can fly off or break during drilling. Do not wear loose clothing or jewellery, they can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Wear protecting hair covering to contain long hair. hold the tool securely with both hands. If not held securely, accidents or injury may result. Never touch the chuck or metal body parts when drilling walls, floors, or other surfaces covering electrical wiring. hold the tool only by the plastic handle to prevent electric shocks. While operating, the work piece must be securely held with the vise or the clamp etc. Noise (sound pressure level) in the workplace can exceed 85 dB (A). In this case, sound insulation and hearing protection measures must be taken by the operator. [. . . ] When drilling in delicate materials such as wall, it is essential to start with ordinary drilling and, oncethe tile is pierced, to continue with impact drilling. In deep bore holes the drill bit should be pulled out occasionally in order to remove the dust and chips from the hole. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. [. . . ]