User manual RYOBI EID500RE

[. . . ] ACCESSORIES: The use of accessories or attachments other than those recommended in this manual might present a hazard. rEPLACEMENT PARTS: When servicing use only identical replacement parts. WARNING: When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. [. . . ] An incorrectly mounted bit is extremely dangerous since it can fly off or break during drilling. Do not wear loose clothing or jewellery, they can be caught in moving parts. Protective gloves and non-skid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair. hold the tool securely with both hands. If not held securely, accidents or injury may result. Never touch the chuck or metal body parts when drilling walls, floors, or other surfaces covering electrical wiring. hold the tool only by the plastic handle to prevent electric shocks. While operating, the work piece must be securely held with a vice or clamp to prevent it from moving due to the drill rotation. EID-500RE Voltage Chuck capacity Drilling capacity in wood in steel in masonry Input No load speed Blows per minute Weight 230 V ~ 50 Hz 13 mm (1/2") 25 mm 10 mm 13 mm 500 W 0 - 2, 700 min-1 0 - 43, 200 min-1 2. This tool is started and stopped by squeezing and releasing the trigger switch (A). The speed can be adjusted in either gear by controlling the force applied to the trigger. The maximum speed of the drill may be set at different speeds by adjusting the variable speed selector (D). For continuous operation, press the lock button (E) while squeezing the trigger. Squeeze the trigger again to release the lock. To change the direction of rotation, stop the tool and push the forward / reverse button (B). [. . . ] By turning the handle grip in direction L, the stopper pole can be released and the depth adjusted. After adjusting the depth, fix the stopper pole again by turning the handle grip in direction M. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. [. . . ]