User manual RYOBI EJS600QEO

[. . . ] It is essential that you read the instructions in this manual before mounting and operating this machine. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "Power Tool'' in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. May be used in conjunction with other symbols or pictures. [. . . ] WARNING Before connecting your saw to power supply source, always check to be sure it is not in lockon position (depress and release switch trigger). Failure to do so could result in accidental starting of your saw resulting in possible serious injury. Also, do not lock the trigger on jobs where your saw may need to be stopped suddenly. 2) Your saw has a variable speed control selector (2) designed to allow operator control and adjustment of speed and power limits. The speed and power of your saw can be increased (R) or decreased (L) by rotating the variable speed control selector in the direction of the arrows. Note: Hold your saw in normal operating position and turn the variable speed control selector counterclockwise to increase speed and power. Turn clockwise to decrease speed and power. If you wish to lock the switch on at a given speed, depress the switch trigger, push in and hold the lock-on button, and release the switch trigger. Next, adjust the variable speed control selector until the desired speed is reached. Note: If the variable speed control selector is fully turned in the clockwise direction (zero setting) your saw may not run. Note: If you desire not to use the variable speed control selector, turn it in the full counterclockwise direction. This will allow the speed of your saw to be controlled by the amount of switch trigger depression. Avoid running your saw at low speeds for extended periods of time. Running at low speeds under constant usage may cause your saw to become overheated. If this occurs, cool your saw by running it without a load and at full speed. The following guidelines may be used in determining correct speed for various applications: The blade storage area (11) is located on the back of dust port. To open: Pull the door down with your thumb or finger. WARNING Do not insert saw blade (7) into air vents. They could come in contact with electrically live internal parts and cause electric shock, resulting in serious injury. WARNING Your saw should never be connected to power supply when you are assembling parts, making adjustments, installing or removing blades or when not in use. Disconnecting your saw will prevent accidental starting which could cause serious injury. WARNING Failure to unplug your saw could result in accidental starting causing possible serious injury. [. . . ] WARNING Failure to unplug your saw could result in accidental starting causing possible serious injury. You can hear a click sound when it is locked securely. The chips and grindings from these materials are highly abrasive to electric tool parts such as bearings, brushes, commutators, etc. Consequently, it is not recommended that this tool be used for extended work on any fiberglass material, wallboard or plaster. [. . . ]