User manual RYOBI EMS-1426L

[. . . ] Do not use electric power tools close to flammable liquids or gases. Protect yourself from electrical shocks. Do not allow other people to touch the electric power tool or cable. Keep other people away from your work area. [. . . ] In the case of dusty work, wear a face mask and protective glasses, do not smoke and stay clear of open fires. WARNING Use the saw blades supplied only for wood and wood products!The tool must be connected to an earthed, 230 V power outlet and have a minimum 10 A fuse. Do not expose the tool to rain or damp conditions. Check the condition of the tool before use. Do not use saw blades made of high-alloy, high-speed steel (HSS). Do not use saw blades which do not correspond to the specifications given in this user manual. Ensure that all moving parts of the blade protector operate without jamming. For large workpieces, use the mounts supplied. Do not use flanges or flange nuts whose bore is larger or smaller than that of the saw blade. Do not use damaged or deformed saw blades. Use the blade only if protective devices are on hand and installed. The saw head must move freely and return to its top starting position when released. do not jam the ON/OFF switch in position. The tool must come to a halt within 10 seconds of the switch being released. Do not point the laser beam at people or animals. Do not touch the Laser 16 lens with hard objects. Clean the laser lens with a soft, dry brush. Trigger switch Low guard lock lever Bench Fence Mitre cut adjuster Bevel cut adjuster Lower guard Saw head lock bolt Lock knob Livetool indicator Bolt holes for attachment to base Depth of cut adjuster Extension arm Holder Clamp Saw spindle lock Dust bag Bevel lock button Lock lever Throat plate Side stop Laser Laser ON/OFF switch Base Housing screw Rubber feet Handle Rear Anti-Tip 1) and fix in any position using the lock nut. If needed, insert clamp (15) in right or left holder (14). The tool should always be mounted securely using bolt holes (11) on a firm surface such as a workbench. WARNING Use the tool only in dry, well-lit surroundings. [. . . ] To clean the housing, all you need is a damp cloth. Please provide a brief description of the fault to help speed up fault detection and repair time. To avoid transport damage, pack the tool securely or use the original packaging. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. [. . . ]