User manual RYOBI ERH-650V

[. . . ] Do not force small tools to do the job of heavy-duty tools. Do not use tools for purposes not intended. For example, do not use a circular saw for cutting tree limbs or logs. Do not wear loose clothing or jewellery that can get caught in moving parts. [. . . ] Make sure of your footing when drilling freehand. Before drilling, use a line detector to locate concealed electric, water or gas lines in walls. avoid touching live components or conductors. Wear goggles and use a dust mask on jobs generating dust. Do not use your hammer drill near flammable liquids or gases. Always pull the plug out of the socket before cleaning your tool or changing accessories. If incorrectly fitted, chisel bits and drill bits may be flung out of the tool accidentally and cause serious injury. Before you start using your hammer drill, always check that the chisel or drill bit is properly locked in the chuck. examine the chuck regularly for signs of wear or damage. Always press the hammer drill against the work surface (wall, ceiling, etc. When you are finished, unplug the hammer drill from the power supply and remove the chisel or drill bit. Always disconnect the hammer drill from the power supply before you change the chisel or drill bit. Wear safety goggles to protect your eyes from flying particles and splinters. Wear a helmet and put up partition walls in your work place!Wear work gloves to protect fingers from bruising and grazing. vibrations can injure the hand-arm system. Keep exposure to vibrations as short as possible. Always keep the power cord behind the tool. Store the tool out of the reach of children. When using the tool, always hold it with both hands and ensure that you have stable footing. Chisels may only be used with ERH-750V with Rotostop engaged. Chisels may not be used with the ERH-650V, as this model does not have Rotostop feature. [. . . ] This warns the user that the tool is connected and will operate when the switch is pressed. Het is niet mogelijk om beitelhamers met het model ERH-650V te gebruiken omdat dit model geen draaistop heeft. Curai accesoriul pe care îl vei folosi i ungei-l cu un strat subire de vaselin înainte de a-l introduce în mandrina SDS+. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. [. . . ]