User manual RYOBI ERO2412VN

[. . . ] It is essential that you read the instructions in this manual before mounting and operating this machine. Before using the RANDOM ORBITAL SANDER, please read the manual carefully, especially the safety instructions. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. [. . . ] Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or bindling of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. , in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. Always wear safety goggles and a dust mask when sanding, especially sanding over-head. the machine is not suitable for wet sanding. Do not use sanding paper larger than needed. Extra paper extending beyond the sanding pad can also cause serious lacerations. The dust bag shall be equipped with the tool. And screw the adapter clockwise until the connection is credible. disconnect the bag in the reverse order. WARNING Do not throw sanding dust on an open fire because materials in fine particle form may be explosive. WARNING A suitable breathing respirator must be worn while sanding lead paint, some woods and metal to avoid breathing the harmful/toxic dust or air. Input Wattage No load speed Orbital diameter Pad size Weight 230 V ~ 50 Hz 240 W 7000-12000 min-1 2. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Disconnecting sander will prevent accidental starting that could cause serious personal injury. [. . . ] 4) For more efficient operation, empty the dust bag when it is no more than half full. This will permit the air to flow through the bag better. Always empty and clean the dust bag thoroughly upon completion of a sanding operation and before placing the sander in storage. WARNING Failure to unplug your sander could result in accidental starting causing possible serious personal injury. [. . . ]