User manual RYOBI G2330-2 ACCESSOIRES

[. . . ] 9 Locating Controls and Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 About the Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Connecting a Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Using the Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter key. Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. At the confirmation prompt, press the Enter key. 3 4 5 6 Customizing Your VAIO Computer > Setting the Password n 124 N To change or remove the power-on password (user password) 1 2 Turn on the computer. Press the F2 key when the VAIO logo appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. Enter the user password and press the Enter key. Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the Enter key. On the password entry screen, enter the current password once and a new password twice, and then press the Enter key. To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter key. Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. At the confirmation prompt, press the Enter key. 3 4 5 6 Customizing Your VAIO Computer > Setting the Password n 125 N Adding the Hard Disk Password The hard disk password provides additional security for the data stored on your built-in storage device. The Hard Disk Password entry screen appears. 4 5 6 7 8 9 If your computer is equipped with both the built-in solid state drive and the built-in hard disk drive, select Hard Disk 1 Password for the solid state drive or select Hard Disk 2 Password for the hard disk drive. Select Change Master Password or Change User Password and press the Enter key. Enter the current password once and then a new password twice. Press the Enter key when the success message appears. Press the Esc key and then the < or , key to select the Exit tab. Press the M or m key to select Exit Setup and press the Enter key. At the confirmation prompt, press the Enter key. Customizing Your VAIO Computer > Setting the Password n 128 N To remove the hard disk password 1 2 Turn on the computer. Press the F2 key when the VAIO logo appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 If you have set the power-on password, enter your power-on password. Press the < or , key to select Security to display the Security tab, select Hard Disk Password, and then press the Enter key. The Hard Disk Password entry screen appears. 4 5 6 7 8 9 If your computer is equipped with both the built-in solid state drive and the built-in hard disk drive, select Hard Disk 1 Password for the solid state drive or select Hard Disk 2 Password for the hard disk drive. Select Enter Master and User Passwords and press the Enter key. Enter the current password for Enter Current Hard Disk Master Password and press the Enter key. Press the Enter key without entering any letter for the remaining fields. [. . . ] ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc. ArcSoft WebCam Companion is a trademark of ArcSoft, Inc. ATI and ATI Catalyst are trademarks of Advanced Micro Devices, Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. [. . . ]