User manual RYOBI HP1441K2F

[. . . ] OPERATOR'S MANUAL CORDLESS DRILL-DRIVER MODEL NO. HP1441 1 8 THANK YOU FOR BUYING A RYOBI CORDLESS DRILL-DRIVER. Your new cordless drill-driver has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. [. . . ] This indicates charger is in control charge mode and should switch to fast charge mode within 5 minutes. When charger is in fast charge mode the red light will come on. If after a period of 15 minutes the yellow and green lights remain on, remove the battery pack, wait 1 minute and reinsert battery pack in charger. If the yellow and green lights continue to remain on an additional 15 minutes, the battery pack is damaged and will not accept charge. s When your battery pack becomes fully charged, the red light will turn off and the green light will turn on. s After normal usage, 1 hour of charge time is required to be fully charged. A minimum charge time of 1 to 1-1/2 hours is required to recharge a completely discharged tool. s The battery pack will become slightly warm to the touch while charging. This is normal and does not indicate a problem. s DO NOT place charger in an area of extreme heat or cold. It will work best at normal room temperature. Fig. 1 BATTERY CHARGER RED LIGHT "ON" INDICATES FAST YELLOW AND GREEN LIGHTS "ON" CHARGING MODE INDICATES CONTROL CHARGE OR POSSIBLE FAULTY BATTERY Fig. 3 LED FUNCTION OF CHARGER LED WILL BE LIGHTED TO INDICATE STATUS OF CHARGER AND BATTERY PACK: 1. Green LED lighted = Fully Charged Battery Pack 3. Yellow and Green LED Lighted = Control Charge or Defective Battery Pack. Page 7 OPERATION WARNING: If any parts are missing, do not operate tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. CENTER POSITION (LOCK) REVERSE DIRECTION OF ROTATION SELECTOR SWITCH See Figure 4. Your drill starts and stops by depressing and releasing the switch trigger. Release the switch trigger to turn drill OFF. SWITCH TRIGGER 2 VARIABLE SPEED See Figure 4. Your drill has a variable speed feature in the switch. The switch delivers higher speed and torque with increased trigger pressure. [. . . ] Abusive practices can damage the tool, as well as the workpiece. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc. , come in contact with plastic parts. They contain chemicals that can damage, weaken, or destroy plastics. CAUTION: Any repairs requiring disassembly should only be performed by a Ryobi Authorized Service Center. For the repair center nearest you, call 1-800-525-2579. BATTERIES Your drill is equipped with Nickel-Cadmium rechargeable batteries. [. . . ]